2007 Chevrolet Matiz

Central Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement PERISHED (5.3.4 (a) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement PERISHED (5.3.4 (a) (i))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Metal brake pipes showing signs of corrosion

Rear brake imbalance slightly high at 24%. Max limit 30%

Various small stone chips in the windscreen

Metal brake pipes showing signs of corrosion

O/s/r tyre worn to 3 mm. Legal limit 1.6 mm

Central Exhaust has a major leak of exhaust gases Silencer (6.1.2 (a))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Rear Direction indicator not working (4.4.1 (a) (ii))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Front Lower Suspension component ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))

Offside Rear Service brake excessively binding (1.2.1 (f))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Centre exhaust mounting insecure

Metal brake pipes showing signs of corrosion

Nearside Headlamp aim too high and too far to the right. (4.1.2 (a))

O/s/r tyre worn to 3 mm. Legal limit 1.6 mm

Offside Headlamp aim too high and too far to the right. (4.1.2 (a))

Covers impede parts of the inspection.

Various brake pipes starting to corrode.

Covers impede parts of the inspection.

Nearside Headlamp not working on dipped beam (1.7.5a)

Various brake pipes starting to corrode.

Both rear brake pipes rusty

Covers impede parts of the inspection

Front exhaust bracket is missing but still supported

Rear exhaust bracket is broken and getting weak

Some parts of exhaust system corroded

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear wheel bearing rough when rotated (2.6.1)

Both rear brake pipes rusty

Covers impede parts of the inspection

Front exhaust bracket is missing but still supported

O/S/R brake slightly binding

Rear exhaust bracket is broken and getting weak

Some parts of exhaust system corroded

Covers impede parts of the inspection.

Exhaust front pipe mounting missing.

Exhaust rear silencer rear mounting corroding and weak.

Offside front and nearside front tyres worn low on inner and outer edges.

Covers impede parts of the inspection.

Slight weep from offside outer driveshaft gaiter.

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

slight binding offside front brake

Covers impede parts of the inspection.

Cut in inner edge of nearside rear tyre.

Offside wiper slightly split and smearing slightly.

Slight to moderate imbalance in front brakes at 17%.