2008 Mazda 5

Front Tyre worn close to legal limit/worn on edge both (5.2.3 (e))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sills (5.3.6 (a) (i))

Brake pedal wearing smooth (1.1.2 (c))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bush (5.3.4 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

undertrays fitted

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Nearside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Brake pedal wearing smooth (1.1.2 (c))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bush (5.3.4 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

undertrays fitted

Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))

Emissions not tested exhaust blowing (8.2.1.2 (d))

Exhaust has a major leak of exhaust gases rear box (6.1.2 (a))

Headlamp aim projected beam image is obviously incorrect both (4.1.2 (c))

Headlamp light source and lamp not compatible both (4.1.4 (c))

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Suspension arm pin or bush excessively worn r/b (5.3.4 (a) (i))

Power steering pipe/hose has slight seepage (2.1.5 (a))

Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))

power steering slightly notchy operation

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Rear Lower Engine mounting damaged but not to excess (6.1.8 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing worn on inner edge (5.2.3 (d) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Power steering pump has slight seepage (2.1.5 (a))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Rear Lower Engine mounting damaged but not to excess (6.1.8 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing worn on inner edge (5.2.3 (d) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Power steering pump has slight seepage (2.1.5 (a))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

stone chip within zone a

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

n/s trailing arm bush starting to de-bond

surface splits to rear bushes on front lower suspension arms

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)

Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)

Centre Rear Statutory seat belt missing (5.1.1)

Nearside Rear Statutory seat belt missing (5.1.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Statutory seat belt missing (5.1.1)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)

Child seat fitted not allowing full inspection of adult belt

rear tyres worn uneven and getting low

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Shock absorber has a serious fluid leak (2.7.3)

Offside Rear Shock absorber has a serious fluid leak (2.7.3)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

handbrake travel high

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

nearside front tyre worn down to 3mm