2008 Ford Ka

Front Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

both outer sills signs of repairs covered in thick black sealant

underbody front to rear covered in thick black sealant

Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i))

Nearside Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Front Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Offside Front Outer Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Brake pad(s) worn down to wear indicator (1.1.13 (a) (i))

Nearside Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Offside Brake pad(s) worn down to wear indicator (1.1.13 (a) (i))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Lower Suspension arm pin or bush excessively worn front bush (5.3.4 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i))

Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill and floor to sill (7.1.1 (a) (i))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Service brake lagging in operation (1.2.1 (d))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill and sill to floor (7.1.1 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Exhaust mounting defective (6.1.2 (a))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement bush (5.3.4 (a) (i))

Nearside Rear Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security arch to sill (6.2.2 (d) (i))

Nearside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security floor to sill (6.2.2 (d) (i))

Offside Front Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security chassis leg (6.2.2 (d) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement bush (5.3.4 (a) (i))

Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security floor to sill (6.2.2 (d) (i))

Nearside Front Headlamp aim not tested (4.1.2 (b))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Upper Macpherson strut pin or bush excessively worn bush or mount (5.3.4 (a) (i))

Offside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill has small hole (6.2.2 (d) (i))

Front Exhaust mounting defective (6.1.2 (a))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement bush (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge outer edge bald (5.2.3 (e))

Nearside Rear Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security arch to sill (6.2.2 (d) (i))

Nearside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security floor to sill (6.2.2 (d) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security chassis leg (6.2.2 (d) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement bush (5.3.4 (a) (i))

Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security floor to sill (6.2.2 (d) (i))

Front Subframe mounting prescribed area is corroded but not considered excessive nearside/offside (5.3.6 (a) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive nearside/offside inner arches (5.3.6 (a) (i))

Nearside Front Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement nearside/offside axle bushes (5.3.4 (a) (i))

Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner arch/sill (7.1.1 (a) (i))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))

Front Subframe mounting prescribed area is corroded but not considered excessive nearside/offside (5.3.6 (a) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive nearside/offside inner arches (5.3.6 (a) (i))

Nearside Front Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement nearside/offside axle bushes (5.3.4 (a) (i))

Front o/s an n/s subframe mounting prescribed area corroded

Nearside Front Headlamp lens slightly defective moisture in unit (4.1.1 (b) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))

Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Front o/s an n/s subframe mounting prescribed area corroded

Nearside Front Headlamp has a product on the lens but not seriously reducing light output misty (4.1.4 (b))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Horn not working (7.7 (a) (ii))

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

repairs have been undersealed

Nearside Rear Upper Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Subframe mounting prescribed area is excessively corroded floor/inner sill (2.4.A.3)

Nearside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear inner sill corroded advise attention

Offside Rear inner sill corroded advise attention

Offside Rear lower part of inner wheel arch to sill corroded advise attention

Rear Bonded suspension unit deteriorated but can function as intended (2.4.F.3)

Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Headlamp aim not tested (1.8.A.1c)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Rear Bonded suspension unit deteriorated but can function as intended (2.4.F.3)

Offside Front Headlamp not working on dipped beam (1.7.5a)

Centre Front Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Rear Rear position lamp(s) not working (1.1.A.3b)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Offside Rear position lamp(s) not working (1.1.A.3b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Bonded suspension unit deteriorated but can function as intended (2.4.F.3)