2002 Yamaha R6

Front Steering headbearing slightly stiff or notchy Slightly Notchy (2.2.2 (f) (i))

Rear Position lamp light intensity obviously reduced (4.2.3 (a) (i))

Rear Stop lamp light intensity obviously reduced (4.3.3 (a) (i))

Rear Stop lamp with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

Front Steering headbearing slightly stiff or notchy Slightly Notchy (2.2.2 (f) (i))

Rear Position lamp light intensity obviously reduced (4.2.3 (a) (i))

Rear Rear reflector missing (4.8.2 (a) (ii))

Rear Stop lamp light intensity obviously reduced (4.3.3 (a) (i))

Rear Stop lamp with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

Exhaust silencer slightly loose (8.1.1 (b) (i))

Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp (1.2.2b(i))

Exhaust mounting does not fully support the exhaust system (7.1.1.c)

Offside Front Brake pad(s) contaminated by oil or grease (3.2.A1k)

Offside Front shock absorber seal failed and leaking oil (2.3.3)

Rear Tyre has a tear caused by separation or partial failure of its structure (4.1.2a(ii))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Steering control handlebar movement restricted by taut cables (2.1.2c)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Rear Nail in tyre ()

Rear suspension bush has slight free play (2.4.A2a(i))

Drive chain slightly loose (6.2.1d)

rear tyre perished

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Tyre worn close to the legal limit (4.1.3(ii))

front fork dust seal corroded and cracked

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Offside Front shock absorber seal failed and leaking oil (2.3.3)

Exhaust noisy (7.1.2)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))