MOT Status
ExpiredMileage
62,136 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake valve leaking load senser (1.1.7 (d) (i))
Exhaust Lambda reading after 2nd fast idle outside specified limits exhaust blowing (8.2.1.2 (c))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Service brake efficiency below requirements (1.2.2 (a) (i))
Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Suspension arm pin or bush worn but not resulting in excessive movement 2 (5.3.4 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Play in steering rack inner joint(s) ()
rear radius arms slightly sized
Nearside Headlamp aim too low (4.1.2 (a))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))
Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Suspension arm pin or bush worn but not resulting in excessive movement 2 (5.3.4 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Play in steering rack inner joint(s) ()
rear radius arms slightly sized
Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Brake load sensing valve seized (3.6.E.3)
Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)
Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Brake load sensing valve linkage stiff (3.6.E.3)
Front Suspension arm rubber bush deteriorated but not resulting in excessive movement o/s & n/s rear bushes debonding (2.4.G.2)
Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Rear wiper blade defective
Brake load sensing valve linkage stiff (3.6.E.3)
o/s/f & n/s/f lower arm rear bushes debonding.
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Brake load sensing valve linkage stiff (3.6.E.3)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
nsr tyre perished
Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
rear tyres perished
Brake load sensing valve linkage stiff (3.6.E.3)
Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Bonded suspension unit deteriorated but can function as intended (2.4.F.3)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Peugeot 206?
Based on 9,831,622 MOT tests across 644,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
DU03 CVA is a 2003 Peugeot 206 in Black with a 1,360cc petrol engine. This vehicle has been through 16 MOT tests with a personal pass rate of 81.3%.
Across all 2003 Peugeot 206 models, the average MOT pass rate is 68.8% with a typical mileage of 62,409 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Peugeot 206 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 446,851 recorded failures. If you're considering buying DU03 CVA, it's worth having these areas checked by a mechanic before committing.
The Peugeot 206 typically stays on UK roads for around 28 years. At 23 years old, this Peugeot 206 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of DU03 CVA?
You can check the full history of DU03 CVA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was DU03 CVA registered?
DU03 CVA is a 2003 Peugeot 206, first registered on 1 March 2003.
Is DU03 CVA safe to buy?
The MOT history for DU03 CVA shows 16 tests with a 81.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does DU03 CVA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on DU03 CVA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.