MOT Status
ValidMileage
150,395 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Inner sill (6.2.2 (d) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Inner sill (6.2.2 (d) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Integral body structure is repaired but structural rigidity is not significantly reduced (6.1.1 (d) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt rearmost arm (5.3.4 (b) (ii))
Nearside Front Road wheel fixing missing (5.2.1 (a) (i))
Nearside Rear Road wheel fixing missing (5.2.1 (a) (i))
Offside Front Lower Suspension arm ball joint excessively worn rearmost arm (5.3.4 (a) (i))
Offside Front Road wheel fixing missing (5.2.1 (a) (i))
Offside Rear Road wheel fixing missing (5.2.1 (a) (i))
Rear Reversing lamp inoperative (4.6.1 (a))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Floor Pan slightly corroded
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Floor Pan slightly corroded
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Registration plate lamp throwing direct white light to the rear (4.7.1 (a))
Nearside and offside rear axle bump stops missing
Offside Obligatory mirror slightly damaged (3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear fog lamp not working (4.5.1 (a) (ii))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Nearside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside and offside rear axle bump stops missing
Offside Obligatory mirror slightly damaged (3.3 (b) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive wing (5.3.6 (a) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Anti-roll bar pin or bush worn but not resulting in excessive movement D bushes (5.3.4 (a) (i))
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Tyre worn close to legal limit/worn on edge all four (4) (5.2.3 (e))
slight corrosion various places ok at time of test
Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive Inner wing (5.3.6 (a) (i))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive Inner wing (5.3.6 (a) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
manufactures engine covers and under trays fitted restricting inspection of components
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
manufactures under trays and engine covers fitted restricting inspection of components
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre tread depth below requirements of 1.6mm 195/70/15 (4.1.E.1)
Offside Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Manufactures engine and body covers fitted restricting inspection of components
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
wont rev for emissions
wont rev for emissions
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pad(s) wearing thin (3.5.1g)
wont rev for emissions
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
wont rev for emissions
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Rear Registration plate lamp not working (1.1.C.1d)
How Reliable is the Audi A4?
Based on 7,096,957 MOT tests across 571,801 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
DU03 DAD is a 2010 Audi A4 in White with a 1,968cc diesel engine. This vehicle has been through 32 MOT tests with a personal pass rate of 78.1%.
Across all 2010 Audi A4 models, the average MOT pass rate is 80.3% with a typical mileage of 94,005 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Audi A4 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 231,238 recorded failures. If you're considering buying DU03 DAD, it's worth having these areas checked by a mechanic before committing.
The Audi A4 typically stays on UK roads for around 31 years. At 16 years old, this Audi A4 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of DU03 DAD?
You can check the full history of DU03 DAD by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was DU03 DAD registered?
DU03 DAD is a 2010 Audi A4, first registered on 27 September 2010.
Is DU03 DAD safe to buy?
The MOT history for DU03 DAD shows 32 tests with a 78.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does DU03 DAD have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on DU03 DAD. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.