2007 Vauxhall Combo

Front Suspension rod pin or bush excessively worn (5.3.4 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Front Brakes imbalanced across an axle by more than 50% Axle 1 (1.2.1 (b) (ii)) DANGEROUS

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

brake pipes corroded

coil springs corroded

front reg plate cracked

front suspension arm bushes worn

inner rack joints worn

sills corroded

wear in front anti roll bar links

Tyre worn close to legal limit/worn on edge o/s n/s front (5.2.3 (e))

brake pipes rusted

exaust corroded

Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Tyre worn close to legal limit/worn on edge o/s n/s front (5.2.3 (e))

brake pipes rusted

exaust corroded

all brake pipes corroded

covers missing rear seat belt storks

front sub frame corroded

n/s outer sill corroded and filled

play in o/s front w bearing

reaer back plates corroded

all brake piopes corroded

rear exaust corroded

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

all brake piopes corroded

rear exaust corroded

brake back plates corroded

brake pipes corroded

exhaust

front reg plate

front tyres

play in o/s front wheel bearing

sills corroded

Front Play in steering rack inner joint(s) ()

exhaust back box corroded

front tyres wearing on inner edge

rear seat belt plastic covers missing

brake pipes corroded front and rear springs corroded

rear exaust corroded

Nearside Front Front position lamp(s) not working (1.1.A.3b)

brake pipes corroded front and rear springs corroded

rear exaust corroded

n/s rear sill damaged

exhaust corroded

front registration plate cracked

Nearside Rear coil spring broken (2.4.C.1a)

Offside Front Track rod end ball joint has excessive play and inner rack joint (2.2.B.1f)

exhaust corroded

front registration plate cracked

n/s rear sill damaged

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

exhaust corroded

front reg plate

n/s rear tyre close to limit

o/s rear tyre perished

seat belt cover missing in rear

n/s rear sill dented

o/s rear tyre perished

rear brake back plates corroded

Nearside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front coil spring fractured (2.4.C.1a)

Offside Front position lamp(s) not working (1.1.A.3b)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Offside Inner Ball joint has slight play (2.2.B.1f)

Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Offside Inner Ball joint has slight play (2.2.B.1f)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)