2007 Mazda 6

Brake lever has insufficient reserve travel (1.1.2 (a))

Nearside Headlamp aim projected beam image is obviously incorrect diffused (4.1.2 (c))

Nearside Headlamp levelling device inoperative (4.1.5 (a))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Headlamp levelling device inoperative (4.1.5 (a))

Offside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Brakes imbalanced across an axle 33% (1.2.1 (b) (i))

Items removed from driver's view prior to test ()

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Front Headlamp lens slightly defective both headlamps lens (4.1.1 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security prescribed areas and both inner sills (6.2.2 (d) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced both wheel arches (6.1.1 (c) (i))

Rear Integral body structure is fractured but structural rigidity is not significantly reduced outer/inner sill (6.1.1 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Front Headlamp lens slightly defective both headlamps lens (4.1.1 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security prescribed areas and both inner sills (6.2.2 (d) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced both wheel arches (6.1.1 (c) (i))

Rear Integral body structure is fractured but structural rigidity is not significantly reduced outer/inner sill (6.1.1 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Front Headlamp lens slightly defective both sides (4.1.1 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security all prescribed areas and both inner sills (6.2.2 (d) (i))

Offside Front Outer Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Position lamp has a product on the lens or light source but not adversely affecting light intensity (4.2.3 (b) (ii))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Suspension arm corroded but not seriously weakened both (5.3.3 (b) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm corroded but not seriously weakened both (5.3.3 (b) (i))

Suspension component mounting prescribed area is corroded but not considered excessive all (5.3.6 (a) (i))

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

exhaust corroded front to rear.

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt rear arm. (2.4.G.2)

Nearside Front Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Offside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt front arm. (2.4.G.2)

Offside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt rear arm. (2.4.G.2)

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g) DANGEROUS

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g) DANGEROUS

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

exhaust corroded front to rear.

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

rear brake discs corroded and scorred

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)