MOT Status
ExpiredMileage
106,442 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii))
Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Rear Upper Suspension rod pin or bush excessively worn (5.3.4 (a) (i))
Subframe mounting prescribed area excessively corroded significantly reducing structural strength BOTH SIDES ON REAR SUBFRAME (5.3.6 (a) (i))
Nearside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Front Windscreen wiper blade defective (3.4 (b) (i))
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened BOTH (1.1.14 (a) (ii))
Rear Child Seat fitted not allowing full inspection of adult belt ()
Child Seat fitted not allowing full inspection of adult belt ()
Offside Rear Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Child Seat fitted not allowing full inspection of adult belt ()
Offside Rear Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Upper Suspension arm has slight play in a pin/bush (2.4.G.2)
Trailing arm rubber bush deteriorated but not resulting in excessive movement both rear (2.4.G.2)
corrosion to exhaust system
corrosion to rear cross member and suspension components
Nearside Front Front position lamp(s) not working (1.1.A.3b)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Headlamp aim too low (1.8)
Offside Rear Upper Suspension arm has slight play in a pin/bush (2.4.G.2)
Trailing arm rubber bush deteriorated but not resulting in excessive movement both rear (2.4.G.2)
corrosion to exhaust system
corrosion to rear cross member and suspension components
Nearside Rear Trailing arm corroded but not seriously weakened (2.4.G.1)
Offside Rear Trailing arm corroded but not seriously weakened (2.4.G.1)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Rear exhaust heat shield insecure, above silencer
Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened inner edge (3.5.1i)
Nearside Rear Trailing arm corroded but not seriously weakened (2.4.G.1)
Offside Front brake disc worn, pitted or scored, but not seriously weakened inner edge (3.5.1i)
Offside Rear Trailing arm corroded but not seriously weakened (2.4.G.1)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Rear exhaust heat shield insecure, above silencer
Exhaust has a minor leak of exhaust gases back box (7.1.2)
baby seat fitted not allowing full check of seat belt
Front Sub-frame corroded and seriously weakened sub frame corroded and holes (2.4.G.1)
Nearside Front Lower Suspension arm has excessive play in a ball joint wish bone (2.4.G.2)
Offside Front Lower Suspension arm has excessive play in a pin/bush wish bone (2.4.G.2)
Offside Front Track rod end ball joint has excessive play (2.2.B.1f)
Exhaust has a minor leak of exhaust gases back box (7.1.2)
baby seat fitted not allowing full check of seat belt
Front subframe rusty.
Offside wiper blade deteriorating.
exhaust back box heat shield insecure
nail in o/s/r tyre
Offside Rear Suspension arm synthetic bush deteriorated resulting in excessive movement (2.4.G.2)
exhaust back box heat shield insecure
nail in o/s/r tyre
Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Brake pad(s) wearing thin (3.5.1g)
all the brake discs wearing
Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Stop lamp not working (1.2.1b)
Rear Brake pad(s) wearing thin (3.5.1g)
all the brake discs wearing
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pad(s) wearing thin (3.5.1g)
How Reliable is the Dodge (usa) Caliber SE?
Based on 3,151 MOT tests across 229 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
DU08 FVR is a 2008 Dodge (usa) Caliber SE in Silver with a 1,798cc petrol engine. This vehicle has been through 17 MOT tests with a personal pass rate of 58.8%.
Across all 2008 Dodge (usa) Caliber SE models, the average MOT pass rate is 64.8% with a typical mileage of 56,373 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Dodge (usa) Caliber SE fails its MOT is suspension arm has excessive play in a ball joint, accounting for 154 recorded failures. If you're considering buying DU08 FVR, it's worth having these areas checked by a mechanic before committing.
The Dodge (usa) Caliber SE typically stays on UK roads for around 20 years. At 18 years old, this Dodge (usa) Caliber SE is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of DU08 FVR?
You can check the full history of DU08 FVR by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was DU08 FVR registered?
DU08 FVR is a 2008 Dodge (usa) Caliber SE, first registered on 28 March 2008.
Is DU08 FVR safe to buy?
The MOT history for DU08 FVR shows 17 tests with a 58.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does DU08 FVR have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on DU08 FVR. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.