2010 Honda Cr-v

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Power steering pipe/hose has slight seepage (2.1.5 (a))

Nearside Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Rear Headlamp levelling device inoperative (4.1.5 (a))

Offside Front Anti-roll bar linkage insecure and impairing directional stability (5.3.3 (a) (ii)) DANGEROUS

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Power steering pipe/hose has slight seepage (2.1.5 (a))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Rear Headlamp levelling device inoperative linkage disconnected linkage (4.1.5 (a))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Inner Integral body structure is corroded but structural rigidity is not significantly reduced inner sills both sides (6.1.1 (c) (i))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Suspension arm ball joint dust cover severely deteriorated both sides (5.3.4 (b) (i))

Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt both sides (2.1.3 (g) (i))

Registration plate does not conform to the specified requirements front and rear (0.1 (d))

Inner Integral body structure is corroded but structural rigidity is not significantly reduced inner sills both sides (6.1.1 (c) (i))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Suspension arm ball joint dust cover severely deteriorated both sides (5.3.4 (b) (i))

Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt both sides (2.1.3 (g) (i))

Nearside Front Tyre worn close to legal limit/worn on edge worn on edge tyre tread 4mm (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge tyre tread 3mm (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge worn on edge tyre tread 3mm (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge tyre tread 2mm (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Outer Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

n/s front tyre scrubbed on outer

n/s rear tyre scrubbed on outer

Front Tyre tread depth below requirements of 1.6mm both (4.1.E.1)

Engine covers fitted obscuring some components in the engine bay

Nail in nearside rear tyre

Under-trays fitted obscuring some underside components