2011 Suzuki Swift

oil leak from drive shaft

Front Position lamp not working both (4.2.1 (a) (ii))

Rear Stop lamp(s) not working both (4.3.1 (a) (ii))

oil leak from drive shaft

Nearside Front Drag link end ball joint has slight play (2.1.3 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords 185/55/16 (5.2.3 (d) (i))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Front Drag link end ball joint has slight play (2.1.3 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Boot space full obscuring some components & prescribed areas

Brake pedal wearing smooth anti-slip rubber worn on edge (1.1.2 (c))

Engine bay covers obscuring some testable components

Front Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Items removed from driver's view prior to test ()

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened inner face (1.1.14 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened inner face (1.1.14 (a) (ii))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Outer sill covers obscuring some prescribed areas

Vehicles internal headlight adjuster altered to recheck lights ()

Boot space full obscuring some components & prescribed areas

Brake pedal wearing smooth anti-slip rubber worn on edge (1.1.2 (c))

Engine bay covers obscuring some testable components

Front Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Items removed from driver's view prior to test ()

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened inner face (1.1.14 (a) (ii))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened inner face (1.1.14 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Headlamp aim too high and too far to the right. (4.1.2 (a))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Outer sill covers obscuring some prescribed areas

Vehicles internal headlight adjuster altered to recheck lights ()

Brake pipe corroded, covered in grease or other material Nearside and offside rear slightly corroded (1.1.11 (c))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Tyre worn close to legal limit/worn on edge Nearside and offside front (5.2.3 (e))

Bonnet cannot be secured in the closed position (3.1 (b) (i))

Brake pipe corroded, covered in grease or other material Nearside and offside rear slightly corroded (1.1.11 (c))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Position lamp not working (4.2.1 (a))

Tyre worn close to legal limit/worn on edge Nearside and offside front (5.2.3 (e))

Nearside Front Play in steering rack inner joint(s) ()

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Direction indicator incorrect colour (1.4.A.2f)

Offside Rear Direction indicator incorrect colour (1.4.A.2f)

Rear Brakes imbalanced across an axle (3.7.B.5b)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Play in steering rack inner joint(s) ()

Nearside Rear Direction indicator slightly discoloured (1.4.A.2f)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear Direction indicator slightly discoloured (1.4.A.2f)

Items removed from drivers view prior to test

Nearside Front Tyre worn close to the legal limit 185/55V16 (4.1.E.1)

Offside Front Tyre worn close to the legal limit 185/55V16 (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)