2001 Fiat Seicento

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Horn not working (7.7 (a))

Nearside Front Direction indicator incorrect colour (4.4.3 (a))

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Direction indicator not working (4.4.1 (a) (ii))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Service brake efficiency below requirements (1.2.2 (a) (i))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Central Brake pipe excessively corroded (1.1.11 (c))

Nearside Rear Brake pipe excessively corroded rear (1.1.11 (c))

Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch (6.1.1 (c) (i))

Nearside Rear Upper Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch (6.1.1 (c) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Tyre worn close to legal limit/worn on edge also cracking (5.2.3 (e))

Suspension component corroded but not seriously weakened (5.3.3 (b) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Tyre worn close to legal limit/worn on edge both (5.2.3 (e))

Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

all suspension components corroded

Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Rear Brake hose has slight corrosion to ferrule Both side (1.1.12 (f) (i))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Under body component corroded

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Under body component corroded

Nearside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

both rear brake back plates corroded

both rear wish bones corroded

Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

Nearside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

both rear brake back plates corroded

both rear wish bones corroded

Engine management light staying on indicating a fault

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Headlamp not working on main beam (1.7.5a)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

rear parking (secondary) brakes imbalanced 37% (3.7.B.6b)

Engine management light staying on indicating a fault

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

exhaust rear box starting to deteriorate

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Side repeater not working (1.4.A.2c)

Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)

Nearside Side repeater missing (1.4.A.2b)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear wheel bearing rough when rotated (2.6.1)