2001 Peugeot 206

Brake pipe corroded, covered in grease or other material all heavy (grease on some) (1.1.11 (c))

Front Brake hose slightly deteriorated both (1.1.12 (b) (ii))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Suspension arm pin or bush worn but not resulting in excessive movement wishbone rear bushes (5.3.4 (a) (i))

Nearside Rear footbrake may require wheel off inspection

Brake pipe excessively corroded Front to rear (1.1.11 (c))

Central Rear Brake pipe excessively corroded (1.1.11 (c))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Front Brake pipe excessively corroded (1.1.11 (c))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Nearside Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) DANGEROUS

Hydraulic leak, but not excessive (8.4.1 (a) (i))

Nearside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside rear brake recording little or no effort (3.7.B.5a)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Front Brake pad(s) wearing thin (3.5.1g)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

oil leak

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside rear brake recording little or no effort (3.7.B.5a)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

oil leak

Front Brake pad(s) wearing thin (3.5.1g)

Oil leak

Brake load sensing valve linkage seized (3.6.E.3)

Brakes imbalanced across an axle (3.7.B.5b)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside rear brake recording little or no effort (3.7.B.5a)

Front Brake pad(s) wearing thin (3.5.1g)

Oil leak

Offside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Headlamp not working on dipped beam (1.7.5a)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Rear Brake pipe slightly corroded (3.6.B.2c)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

brake pipe nearside rear axle clip not effevctive but pipe still secure at time of test

Nearside Front Headlamp aim too low (1.8)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Headlamp aim too low (1.8)

Rear Brake pipe slightly corroded (3.6.B.2c)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

brake pipe nearside rear axle clip not effevctive but pipe still secure at time of test

Rear Brake pipe kinked (3.6.B.2b)

Headlamp aim too high (1.8)

Centre Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Brake load sensing valve linkage stiff (3.6.E.3)