2001 MG Mgf

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened corroded inner face (1.1.14 (a) (ii))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened corroded inner face (1.1.14 (a) (ii))

Emissions unable to be completed (8.2.1.2 (d))

Emissions unable to be completed major exhaust blow (8.2.1.2 (d))

Exhaust has a major leak of exhaust gases flexi (6.1.2 (a))

Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened corroded inner face (1.1.14 (a) (ii))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened corroded inner face (1.1.14 (a) (ii))

Offside Rear Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Underside wax oiled

Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

front subframe corroded

rear subframe corroded

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Front All direction indicators not working (4.4.1 (a) (ii))

Nearside Front Suspension arm corroded and seriously weakened (5.3.3 (b) (i))

Nearside Rear Subframe mounting prescribed area is inadequately repaired (5.3.6 (a) (i))

Nearside Rear Tyre not fitted in accordance with side wall instructions (5.2.3 (i))

Offside Front Suspension arm corroded and seriously weakened (5.3.3 (b) (i))

Rear Registration plate inscription illegible (0.1 (b))

Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Suspension levelling valve modified so that its function is seriously affected no fluid in suspension (5.3.5 (b) (ii)) DANGEROUS

front subframe corroded

rear subframe corroded

high level stop lamps partially working

rear exhaust silencer is corroding

rear exhaust silencer support strap is corroding

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

front tyres worn adversely on inner tread

high level stop lamps partially working

rear exhaust silencer is corroding

rear exhaust silencer support strap is corroding

Coolant leak

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Rear brake disc slightly pitted (3.5.1h)

both front tyres wearing on inner edges

rear exhaust support strap corroding

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Coolant leak

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Rear brake disc slightly pitted (3.5.1h)

both front tyres wearing on inner edges

rear exhaust support strap corroding

Centre Stop lamp remains on when the brakes are released (1.2.1e)

Nearside Stop lamp remains on when the brakes are released (1.2.1e)

Offside Stop lamp remains on when the brakes are released (1.2.1e)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front brake disc excessively scored (3.5.1h)

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front brake disc excessively scored (3.5.1h)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

both parking and service brake efforts close to the legal limits - recommend further investigation.