MOT Status
ExpiredMileage
141,431 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Nearside Rear Brake pipe excessively corroded (1.1.11 (c))
Nearside Rear Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i))
Nearside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Rear Brakes imbalanced across an axle (1.2.1 (b) (i))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
inner/outer sills corroded
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
inner & outer sills corroded
Nearside Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Coil spring corroded (5.3.1 (b) (i))
Offside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material to comp valve (1.1.11 (c))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))
Offside Front Upper Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Horn not working (7.7 (a) (ii))
Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))
Offside Front Upper Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Offside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))
Offside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))
Offside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Brake pipe corroded, covered in grease or other material centre (1.1.11 (c))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))
Offside Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Front Anti-roll bar slightly distorted (2.4.G.1)
Fuel tank insecure (7.2.1)
Nearside Front Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Front coil spring broken (2.4.C.1a)
Rear fog lamp switch faulty (1.3.1a)
Front Anti-roll bar slightly distorted (2.4.G.1)
Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Outer Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Front coil spring broken (2.4.C.1a)
Rear fog lamp switch faulty (1.3.1a)
Nearside Front Direction indicator slightly discoloured (1.4.A.2f)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement front and rear bush (2.4.G.2)
Oil leak ()
both rear tyres cracked
fuel tank strap broken
Nearside Headlamp not working on dipped beam (1.7.5a)
Indicator switch faulty (1.4.A.1)
Offside Windscreen washer provides insufficient washer liquid (8.2.3)
front to rera brake pipe rusty
Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Brake load sensing valve seized (3.6.E.3)
Horn not working (1.6.2a)
Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside front brake binding (3.7.B.1)
Front Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS
front to rera brake pipe rusty
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
cv gaiter perishing
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Brake load sensing valve linkage seized (3.6.E.3)
Brakes imbalanced across an axle (3.7.B.5b)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Brake hose twisted (found during steering lock to lock check) (2.2.D.2b)
Brake load sensing valve linkage seized (3.6.E.3)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
How Reliable is the Peugeot 206?
Based on 9,831,622 MOT tests across 644,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
DU53 KKG is a 2003 Peugeot 206 in Grey with a 1,398cc diesel engine. This vehicle has been through 27 MOT tests with a personal pass rate of 63%.
Across all 2003 Peugeot 206 models, the average MOT pass rate is 68.8% with a typical mileage of 62,409 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 206 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 446,851 recorded failures. If you're considering buying DU53 KKG, it's worth having these areas checked by a mechanic before committing.
The Peugeot 206 typically stays on UK roads for around 28 years. At 23 years old, this Peugeot 206 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of DU53 KKG?
You can check the full history of DU53 KKG by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was DU53 KKG registered?
DU53 KKG is a 2003 Peugeot 206, first registered on 1 September 2003.
Is DU53 KKG safe to buy?
The MOT history for DU53 KKG shows 27 tests with a 63% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does DU53 KKG have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on DU53 KKG. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.