2005 Lexus IS200

Brake pipe corroded, covered in grease or other material both front to rear at rear (1.1.11 (c))

Exhaust has a minor leak of exhaust gases front flange corroded (6.1.2 (a))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Suspension arm corroded but not seriously weakened all front lower arms (5.3.3 (b) (i))

Suspension arm corroded but not seriously weakened most rear arms (5.3.3 (b) (i))

Brake pipe corroded, covered in grease or other material both front to rear at rear (1.1.11 (c))

Exhaust has a minor leak of exhaust gases cat to middle flange corroded (6.1.2 (a))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Rear Direction indicator slightly discoloured (4.4.3 (a))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Brake pipe corroded, covered in grease or other material both front to rear at rear (1.1.11 (c))

Exhaust has a minor leak of exhaust gases cat to middle flange corroded (6.1.2 (a))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Rear Direction indicator slightly discoloured (4.4.3 (a))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Inner Vehicle structure is corroded but structural rigidity is not significantly reduced and outer sill (6.1.1 (c) (i))

Nearside Rear Upper Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Position lamp light intensity obviously reduced (4.2.3 (a) (i))

Offside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Upper Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Direction indicator slightly discoloured (4.4.3 (a))

Offside Rear Inner Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Outer Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

all tyres aged and perished

Nearside Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Nearside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Brake pad(s) wearing thin (3.5.1g)

Under-trays fitted obscuring some underside components

Offside Front coil spring broken (2.4.C.1a)

Under-trays fitted obscuring some underside components

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

restricted view of under vehicle undertrays fitted

Rear Tyre worn close to the legal limit (4.1.E.1)

advise closer inspection of rear brake pads required.

both front wiper blades badly split, advise replacement before further deterioration

Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre not fitted in accordance with side wall instructions (4.1.D.1f)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Front Brake pad(s) wearing thin (3.5.1g)