2005 Vauxhall Vivaro

Brake hose has slight corrosion to ferrule All rears (1.1.12 (f) (i))

Front Suspension component corroded but not seriously weakened Hubs and associated arms (5.3.3 (b) (i))

Nearside Rear Position lamp has a product on the lens or light source which changes the emitted colour stop and tail light fading to white (4.2.3 (b) (i))

Offside Brake pipe corroded, covered in grease or other material Front to rear at hose (1.1.11 (c))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive Inner arch / wing (5.3.6 (a) (i))

Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Rear Brake pipe corroded, covered in grease or other material Both pipes along susp arms (1.1.11 (c))

Rear Suspension arm pin or bush worn but not resulting in excessive movement Both lower arms rusting away at front, bushes secure at time of test (5.3.4 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive Lower arm mounting points (5.3.6 (a) (i))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Brake hose has slight corrosion to ferrule All rears (1.1.12 (f) (i))

Front Suspension component corroded but not seriously weakened Hubs and associated arms (5.3.3 (b) (i))

Nearside Rear Position lamp has a product on the lens or light source which changes the emitted colour stop and tail light fading to white (4.2.3 (b) (i))

Offside Brake pipe corroded, covered in grease or other material Front to rear at hose (1.1.11 (c))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive Inner arch / wing (5.3.6 (a) (i))

Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Rear Brake pipe corroded, covered in grease or other material Both pipes along susp arms (1.1.11 (c))

Rear Suspension arm pin or bush worn but not resulting in excessive movement Both lower arms rusting away at front, bushes secure at time of test (5.3.4 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive Lower arm mounting points (5.3.6 (a) (i))

Brake hose has slight corrosion to ferrule Rear hoses (1.1.12 (f) (i))

Brake pipe corroded, covered in grease or other material Both rear pipes along arms (1.1.11 (c))

Nearside Rear Stop and tail faded

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement Main trail arm bush casing rusting away, no movement at time of test (5.3.4 (a) (i))

Offside Brake pipe corroded, covered in grease or other material Front to rear at union to hose (1.1.11 (c))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement Main trail arm bush casing very rusty (5.3.4 (a) (i))

Brake hose has slight corrosion to ferrule Rear ones (1.1.12 (f) (i))

Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated Leaking grease, secure at time of test (6.1.7 (g) (i))

Nearside Rear Position light / stop light slightly faded

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake pipe corroded, covered in grease or other material Both sides at unions to hoses (1.1.11 (c))

Brake hose has slight corrosion to ferrule All four rear hoses (1.1.12 (f) (i))

Brake pipe corroded, covered in grease or other material NSR and OSR corroded at unions to hoses (1.1.11 (c))

Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Brake hose has slight corrosion to ferrule All four rear hoses (1.1.12 (f) (i))

Brake pipe corroded, covered in grease or other material NSR and OSR corroded at unions to hoses (1.1.11 (c))

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Brake pipe corroded, covered in grease or other material Corroded at union to hose (1.1.11 (c))

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

Offside Rear Brake pipe corroded, covered in grease or other material Before flexi brake hose (1.1.11 (c))

Nearside Rear Brake pipe excessively corroded Before flexi brake hose (1.1.11 (c))

Nearside Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Both sides (5.3.4 (a) (i))

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

Offside Rear Brake pipe corroded, covered in grease or other material Before flexi brake hose (1.1.11 (c))

Different size tyres fitted on the front axle to the rear axle.

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material Before flexible brake hose. (1.1.11 (c))

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive Both sides. (5.3.6 (a) (i))

Different size tyres fitted on front and rear axles

Front Brake disc worn, pitted or scored, but not seriously weakened both sides corroded on inner faces (1.1.14 (a) (ii))

Front Shock absorbers light misting of oil or has limited damping effect both sides (5.3.2 (b))

Hi level stop lamp not working

Nearside Rear Brake pipe corroded, covered in grease or other material front to rear at union to to hose corroded (1.1.11 (c))

Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))

Rear Suspension spring mounting prescribed area is corroded but not considered excessive Upper spring mounting plates both sides (5.3.6 (a) (i))

Offside Rear Parking brake inoperative on one side Very low effort (1.4.1 (a))

Offside Steering rack gaiter missing or no longer prevents the ingress of dirt not secured to rack (2.1.3 (g) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Different size tyres fitted on front and rear axles

Front Brake disc worn, pitted or scored, but not seriously weakened both sides corroded on inner faces (1.1.14 (a) (ii))

Front Shock absorbers light misting of oil or has limited damping effect both sides (5.3.2 (b))

Hi level stop lamp not working

Nearside Rear Brake pipe corroded, covered in grease or other material front to rear at union to to hose corroded (1.1.11 (c))

Nearside Rear Position lamp incorrect colour Faded. (4.2.3 (a) (i))

Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))

Rear Suspension spring mounting prescribed area is corroded but not considered excessive Upper spring mounting plates both sides (5.3.6 (a) (i))

Front brake disc worn, pitted or scored, but not seriously weakened inner faces. (3.5.1i)

Nearside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front position lamp(s) not working Both (1.1.A.3b)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Headlamp aim too low (1.8)

Rear Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Front brake disc worn, pitted or scored, but not seriously weakened inner faces. (3.5.1i)

Nearside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

offside rear tyre is cut and worn.

Different size tyres fitted front and rear.

Nearside Front Anti-roll bar has slight play in a pin/bush d bush (2.4.G.2)

Offside Front Anti-roll bar has slight play in a pin/bush d bush (2.4.G.2)

brake disc worn, pitted or scored, but not seriously weakened Rears inner faces (3.5.1i)

offside front tyre is worn

Nearside Front Direction indicator incorrect colour (1.4.A.2f)

Nearside Steering rack gaiter split (2.2.D.2d)

Offside Steering rack gaiter split (2.2.D.2d)

Nearside Front Anti-roll bar has slight play in a pin/bush d bush (2.4.G.2)

Offside Front Anti-roll bar has slight play in a pin/bush d bush (2.4.G.2)

brake disc worn, pitted or scored, but not seriously weakened Rears inner faces (3.5.1i)

offside front tyre is worn

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Stop lamp not working (1.2.1b)

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Nearside Stop lamp not working (1.2.1b)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

AIR BAG LIGHT ON

FRONT AND REAR TYRES DIFFERENT SIZES

SPARE TYRE MISSING

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Nearside Stop lamp not working (1.2.1b)

Nearside Track rod end ball joint has excessive play (2.2.B.1f)

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Rear Body has a projection caused by damage (6.1.C.1)

Offside Rear fog lamp insecure (1.3.2a)

AIR BAG LIGHT ON

FRONT AND REAR TYRES DIFFERENT SIZES

SPARE TYRE MISSING

Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)

Inner Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' (8.3.1d)