2006 Volkswagen Beetle

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill several place=s (5.3.6 (a) (i))

Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill several places (5.3.6 (a) (i))

Offside Rear Tyre has a bulge, caused by separation or partial failure of its structure outer cracked (5.2.3 (d) (ii)) DANGEROUS

Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill several places (5.3.6 (a) (i))

Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill several places (5.3.6 (a) (i))

Nearside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive sill covered in underbody schultz (5.3.6 (a) (i))

Offside Inner Suspension component mounting repair covered in underseal sill covered in under body schultz (5.3.6 (a) (i))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Front Macpherson strut top bush or bearing has excessive wear or free play (5.3.4 (a) (i))

Nearside Front Shock absorbers has negligible damping effect (5.3.2 (d))

Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Nearside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced axle (6.1.1 (c) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Service brake binding but not excessively (1.2.1 (f))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Suspension arm ball joint excessively worn bottom ball joint (5.3.4 (a) (i))

Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Suspension arm ball joint excessively worn bottom ball joint (5.3.4 (a) (i))

Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Service brake binding but not excessively (1.2.1 (f))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Service brake binding but not excessively both (1.2.1 (f))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Road wheel fixing missing (5.2.1 (a) (i))

Offside Rear Road wheel fixing missing (5.2.1 (a) (i))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Service brake binding but not excessively both (1.2.1 (f))

Rear Service brake binding but not excessively (1.2.1 (f))

Electronic stability control warning lamp indicates a fault (7.12 (e))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Offside Front Road wheel fixing missing wheel nut missing (5.2.1 (a) (i))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Front Suspension component ball joint has slight play (5.3.4 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

eml on

Offside Front Tyre worn close to the legal limit INNER EDGE (4.1.E.1)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Tyre worn close to the legal limit INNER EDGE (4.1.E.1)

o/s seat back inop

Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Nearside Rear Direction indicator not working (1.4.A.2c)

Nearside Registration plate lamp not working (1.1.C.1d)

Nail in offside rear tyre