2008 Toyota Aygo

Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Rear Service brake excessively binding (1.2.1 (f))

Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Exhaust mounting defective (6.1.2 (a))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Rear Coil spring corroded (5.3.1 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Rear Exhaust mounting defective rubber mounting (6.1.2 (a))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill area (5.3.6 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill area (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill area (5.3.6 (a) (i))

Rear Exhaust has a major leak of exhaust gases box (6.1.2 (a))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Front Suspension component pin or bush likely to become detached wishbone rear (5.3.4 (a) (ii)) DANGEROUS

Nearside Front Tyre has a lump, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Offside Front Suspension component pin or bush likely to become detached wishbone rear (5.3.4 (a) (ii)) DANGEROUS

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

under body & suspension components badly corroded

Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Offside Rear Tyre slightly damaged/cracking or perishing slightly perished in tread grooves (5.2.3 (d) (ii))

Offside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Rear Brake hose has slight corrosion to ferrule both sides (1.1.12 (f) (i))

Driver's view of the road through the swept area of the windscreen significantly affected by an obstruction phone holder/glue in middle of windscreen (3.1 (a) (ii))

Nearside Rear Brake pipe excessively corroded to flexi hose (1.1.11 (c))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Rear Brake pipe excessively corroded to flexi hose (1.1.11 (c))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Tyre slightly damaged/cracking or perishing slightly perished in tread grooves (5.2.3 (d) (ii))

Offside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Rear Brake hose has slight corrosion to ferrule both sides (1.1.12 (f) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge worn on edges (5.2.3 (e))

Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge worn on edges (5.2.3 (e))

Rear Brake hose has slight corrosion to ferrule both sides (1.1.12 (f) (i))

Rear Brake pipe corroded, covered in grease or other material both sides to rear flexi hoses (1.1.11 (c))

Rear Suspension component mounting prescribed area is corroded but not considered excessive both sides rear outer sills (5.3.6 (a) (i))

Nearside Front Lower Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Front Lower Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))

Offside Rear Service brake excessively binding (1.2.1 (f))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge worn on edges (5.2.3 (e))

Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge worn on edges (5.2.3 (e))

Rear Brake hose has slight corrosion to ferrule both sides (1.1.12 (f) (i))

Rear Brake pipe corroded, covered in grease or other material both sides to rear flexi hoses (1.1.11 (c))

Rear Suspension component mounting prescribed area is corroded but not considered excessive both sides rear outer sills (5.3.6 (a) (i))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Rear Brake hose has slight corrosion to ferrule both sides (1.1.12 (f) (i))

Suspension component mounting prescribed area is corroded but not considered excessive both sides rear of sills (5.3.6 (a) (i))

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive sill (5.2.6)

o/s rear brake binding slightly

Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement rear bush (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm inner edge (4.1.E.1)

Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement rear bush (2.4.G.2)

Offside Front Tyre tread depth below requirements of 1.6mm inner edge (4.1.E.1)

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive sill (5.2.6)

front to rear brake pipes corroded at rear

o/s rear brake binding slightly

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

front brake discs slightly corroded

Front brake discs worn.

Nail in nearside rear tyre

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Brake pad(s) wearing thin (3.5.1g)