MOT Status
ValidMileage
138,521 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive rear areas inc subframe ,and attached components (5.3.6 (a) (i))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive rear areas inc subframe ,and attached components (5.3.6 (a) (i))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Front Inner Tyre worn close to legal limit/worn on edge o/s and n/s (5.2.3 (e))
Nearside Front Windscreen wiper blade defective (3.4 (b) (i))
Offside Front Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Track rod end ball joint has slight play (2.1.3 (b) (i))
Oil leak, but not excessive engine (8.4.1 (a) (i))
Rear Brake hose has slight corrosion to ferrule o/s and n/s (1.1.12 (f) (i))
Rear Exhaust mounting defective (6.1.2 (a))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Position lamp not working o/s and n/s (4.2.1 (a) (ii))
Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Headlamp aim too low (4.1.2 (a))
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Offside Rear Bumper damaged and likely to cause injury when grazed or contacted (6.1.4 (a) (i))
Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Offside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Undertray likely to become detached (6.2.1 (a) (ii)) DANGEROUS
Front Inner Tyre worn close to legal limit/worn on edge o/s and n/s (5.2.3 (e))
Nearside Front Windscreen wiper blade defective (3.4 (b) (i))
Offside Front Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Track rod end ball joint has slight play (2.1.3 (b) (i))
Oil leak, but not excessive engine (8.4.1 (a) (i))
Rear Brake hose has slight corrosion to ferrule o/s and n/s (1.1.12 (f) (i))
Rear Exhaust mounting defective (6.1.2 (a))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Position lamp slightly affected by the operation of another lamp (4.2.3 (c))
Offside Rear Position lamp slightly affected by the operation of another lamp (4.2.3 (c))
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Front Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Nail in tyre ()
Offside Rear Position lamp slightly affected by the operation of another lamp (4.2.3 (c))
Offside Rear Position lamp slightly affected by the operation of another lamp (4.2.3 (c))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e))
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e))
Front Bumper insecure (6.1.4 (a) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e))
Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Central Stop lamp(s) not working (4.3.1 (a) (ii))
Front Bumper damaged and likely to cause injury when grazed or contacted (6.1.4 (a) (i))
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Rear Anti-roll bar has slight play in a ball joint (2.4.G.2)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Mazda 3?
Based on 2,040,939 MOT tests across 164,053 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
DU60 WTW is a 2010 Mazda 3 in Red with a 1,560cc diesel engine. This vehicle has been through 20 MOT tests with a personal pass rate of 65%.
Across all 2010 Mazda 3 models, the average MOT pass rate is 77.7% with a typical mileage of 68,318 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 40,716 recorded failures. If you're considering buying DU60 WTW, it's worth having these areas checked by a mechanic before committing.
The Mazda 3 typically stays on UK roads for around 22 years. At 16 years old, this Mazda 3 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of DU60 WTW?
You can check the full history of DU60 WTW by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was DU60 WTW registered?
DU60 WTW is a 2010 Mazda 3, first registered on 1 September 2010.
Is DU60 WTW safe to buy?
The MOT history for DU60 WTW shows 20 tests with a 65% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does DU60 WTW have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on DU60 WTW. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.