2003 Ford Transit

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Offside Rear Direction indicator incorrect colour (4.4.3 (a))

Offside Front Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Nearside Rear Direction indicator slightly discoloured (4.4.3 (a))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis outrigger/spring mounting (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Windscreen washer provides insufficient washer liquid (3.5 (a))

Brake load sensing valve inoperative and ABS not fitted or inoperative (1.1.17 (c) (ii)) DANGEROUS

Driver's seat insecure (6.2.5 (a) (ii)) DANGEROUS

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))

Central Prop shaft bearing housing insecure (6.1.7 (f) (i))

Exhaust emissions test not completed because smoke levels are significantly in excess of the specified limit values (8.2.2.2 (f))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill (5.3.6 (a) (i))

Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill (7.1.1 (a) (i))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill (5.3.6 (a) (i))

Brake load sensing valve stiff (1.1.17 (c) (ii))

Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Central Prop shaft flexible coupling slightly deteriorated (6.1.7 (d) (i))

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Offside Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Nearside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Nearside Inner Vehicle structure has excessive corrosion which adversely affects braking or steering sill (6.1.1 (c) (ii)) DANGEROUS

Offside Inner Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii)) DANGEROUS

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Shock absorber has an excessively worn bush (2.7.4)

rear brake application uneven (3.7.B.2)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Inner Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Nearside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Outer Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Inner Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Outer Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

general corrosion over vehicle underside

Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)

Offside Front wheel bearing has excessive play (2.5.A.3c)

Offside Inner Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

front brake application uneven (3.7.B.2)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Inner Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Nearside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Outer Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Outer Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Inner Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Outer Front Brake pipe slightly corroded (3.6.B.2c)

Offside Outer Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

general corrosion over vehicle underside

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Inner Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Nearside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Outer Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Front Front wheel bearing has slight play (2.5.A.3c)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Inner Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Outer Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Outer Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

nearside rear bump stop missing

offside front tyre wearing on outer edge

offside rear tyre wearing on inner edge

Brake load sensing valve seized (3.6.E.3)

Nearside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)

Nearside Headlamp aim too low (1.8)

Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Body has a sharp edge caused by damage (6.1.C.1)

Offside Headlamp aim too low (1.8)

Offside Rear Body has a sharp edge caused by corrosion (6.1.C.1)

Offside Rear Body has a sharp edge caused by damage (6.1.C.1)

Offside Rear Body has a sharp edge caused by damage (6.1.C.1)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Inner Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Nearside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Outer Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Front Front wheel bearing has slight play (2.5.A.3c)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Inner Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Outer Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Outer Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

nearside rear bump stop missing

offside front tyre wearing on outer edge

offside rear tyre wearing on inner edge

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

rear brake application uneven (3.7.B.2)

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

Parking brake: efficiency below requirements (3.7.B.7)