MOT Status
ExpiredMileage
95,879 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake hose slightly deteriorated all (1.1.12 (b) (ii))
Coil spring corroded all (5.3.1 (b) (i))
Front Exhaust has a minor leak of exhaust gases down pipe to manifold (6.1.2 (a))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Nearside Suspension component mounting prescribed area is corroded but not considered excessive sill backing area (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wheel arch area (5.3.6 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Offside Suspension component mounting prescribed area is corroded but not considered excessive sill backing area (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake pipe corroded, covered in grease or other material of front to rear main [greased] (1.1.11 (c))
Suspension component mounting prescribed area is corroded but not considered excessive under body area around all suspension components (5.3.6 (a) (i))
Suspension component mounting repair covered in underseal all (5.3.6 (a) (i))
Nearside Front Service brake excessively binding (1.2.1 (f))
Nearside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch area (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch area (5.3.6 (a) (i))
Brake hose slightly deteriorated all (1.1.12 (b) (ii))
Coil spring corroded all (5.3.1 (b) (i))
Front Exhaust has a minor leak of exhaust gases down pipe to manifold (6.1.2 (a))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Nearside Suspension component mounting prescribed area is corroded but not considered excessive sill backing area (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wheel arch area (5.3.6 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Offside Suspension component mounting prescribed area is corroded but not considered excessive sill backing area (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake pipe corroded, covered in grease or other material of front to rear main [greased] (1.1.11 (c))
Suspension component mounting prescribed area is corroded but not considered excessive under body area around all suspension components (5.3.6 (a) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Brake hose has slight corrosion to ferrule all (1.1.12 (f) (i))
Brake pipe corroded, covered in grease or other material all (1.1.11 (c))
Coil spring corroded all (5.3.1 (b) (i))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wheel arch (5.3.6 (a) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust has a major leak of exhaust gases (6.1.2 (a))
Brake hose has slight corrosion to ferrule all (1.1.12 (f) (i))
Brake pipe corroded, covered in grease or other material all (1.1.11 (c))
Coil spring corroded all (5.3.1 (b) (i))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wheel arch (5.3.6 (a) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Brake hose has slight corrosion to ferrule all (1.1.12 (f) (i))
Brake pipe corroded, covered in grease or other material all (1.1.11 (c))
Nearside Rear Suspension component pin or bush slightly worn trailing arm (5.3.4 (a) (i))
Offside Rear Suspension component pin or bush slightly worn trailing arm (5.3.4 (a) (i))
nearside and offside inner sills corroded
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Brake hose has slight corrosion to ferrule all (1.1.12 (f) (i))
Brake pipe corroded, covered in grease or other material all (1.1.11 (c))
Nearside Rear Suspension component pin or bush slightly worn trailing arm (5.3.4 (a) (i))
Offside Rear Suspension component pin or bush slightly worn trailing arm (5.3.4 (a) (i))
nearside and offside inner sills corroded
Brake hose has slight corrosion to ferrule all (1.1.12 (f) (i))
Brake pipe corroded, covered in grease or other material all (1.1.11 (c))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Brake hose has slight corrosion to ferrule all (1.1.12 (f) (i))
Brake pipe corroded, covered in grease or other material all (1.1.11 (c))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Stop lamp not working (1.2.1b)
Nearside Front Body has slight corrosion (6.1.B.2)
Offside Front Body has slight corrosion (6.1.B.2)
Centre Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Suspension arm has slight play in a pin/bush (2.4.G.2)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Offside Rear Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
How Reliable is the Rover 45?
Based on 849,212 MOT tests across 72,661 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
DV04 UBS is a 2004 Rover 45 in Red with a 1,588cc petrol engine. This vehicle has been through 22 MOT tests with a personal pass rate of 77.3%.
Across all 2004 Rover 45 models, the average MOT pass rate is 74.2% with a typical mileage of 49,972 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Rover 45 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 48,934 recorded failures. If you're considering buying DV04 UBS, it's worth having these areas checked by a mechanic before committing.
The Rover 45 typically stays on UK roads for around 26 years. At 22 years old, this Rover 45 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of DV04 UBS?
You can check the full history of DV04 UBS by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was DV04 UBS registered?
DV04 UBS is a 2004 Rover 45, first registered on 30 April 2004.
Is DV04 UBS safe to buy?
The MOT history for DV04 UBS shows 22 tests with a 77.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does DV04 UBS have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on DV04 UBS. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.