MOT Status
ExpiredMileage
142,363 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Brake pad(s) worn down to wear indicator (1.1.13 (a) (i))
Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Nearside Rear Suspension arm corroded and seriously weakened (5.3.3 (b) (i))
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))
Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))
Rear Sub-frame corroded and seriously weakened (5.3.3 (b) (i))
Nearside Rear Anti-roll bar attachment bracket/mounting likely to become detached (5.3.3 (a) (ii)) DANGEROUS
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))
Central Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Exhaust system insecure (6.1.2 (a))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Central Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))
Offside Front Position lamp not working (4.2.1 (a))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Headlamp aim too high both (4.1.2 (a))
Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))
Nearside Rear Stop lamp not working (1.2.1b)
Rear Seat belt anchorage prescribed area is excessively corroded both (5.2.6)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nail in nearside rear tyre
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Rear Lower Shock absorber has a slightly worn bush (2.7.4)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Upper Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Rear Lower Shock absorber has a slightly worn bush (2.7.4)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Upper Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
rear exhaust pipe support bracket broken, but system still secure
Nearside Front Body has slight corrosion (6.1.B.2)
Nearside Headlamp aim too low and too far to the right. (1.8)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Upper Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Offside Front Body has slight corrosion (6.1.B.2)
Offside Front Front position lamp(s) not working (1.1.A.3b)
Offside Headlamp aim too low and too far to the right. (1.8)
Offside Rear Lower Body has a sharp edge caused by damage (6.1.C.1)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Upper Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Body has slight corrosion (6.1.B.2)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Upper Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Offside Front Body has slight corrosion (6.1.B.2)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Upper Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Stop lamp not working (1.2.1b)
Offside Front position lamp(s) not working (1.1.A.3b)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
high level brake light not working
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
high level brake light not working
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Stop lamp not working (1.2.1b)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Front Headlamp aim too low (1.8)
Offside Headlamp aim too high and too far to the left. (1.8)
Headlamp aim too high (1.8)
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
DV05 VZS is a 2005 Mazda 6 in Silver with a 1,999cc petrol engine. This vehicle has been through 25 MOT tests with a personal pass rate of 52%.
Across all 2005 Mazda 6 models, the average MOT pass rate is 72.4% with a typical mileage of 77,324 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying DV05 VZS, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 21 years old, this Mazda 6 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of DV05 VZS?
You can check the full history of DV05 VZS by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was DV05 VZS registered?
DV05 VZS is a 2005 Mazda 6, first registered on 19 May 2005.
Is DV05 VZS safe to buy?
The MOT history for DV05 VZS shows 25 tests with a 52% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does DV05 VZS have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on DV05 VZS. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.