2006 Nissan Navara

Rear Position lamp has a product on the lens or light source but not adversely affecting light intensity x2 tinted (4.2.3 (b) (ii))

general underbody corrosion

general corrosion underbody

Front Service brake fluctuating, but not excessively (1.2.1 (e))

Integral body structure is corroded but structural rigidity is not significantly reduced significant corrosion to entire underside of vehicle - close to excess in places (6.1.1 (c) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis (6.2.2 (d) (i))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Track rod end ball joint has excessive play (2.1.3 (b) (i))

Windscreen washer not working (3.5 (a))

Front Service brake fluctuating, but not excessively (1.2.1 (e))

Integral body structure is corroded but structural rigidity is not significantly reduced significant corrosion to entire underside of vehicle - close to excess in places (6.1.1 (c) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Central Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross-member, front of leaf springs. O/S and N/S (5.3.6 (a) (i))

Exhaust emissions exceed manufacturer's specified limit plate limit = 1.32 (8.2.2.2 (a))

Front Brakes imbalanced across an axle (1.2.1 (b) (i))

Horn not working (7.7 (a) (ii))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis leg (6.2.2 (d) (i))

Nearside Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Offside Front Position lamp incorrect colour (4.2.3 (a) (i))

brake pedal spongey in operation

substantial corrosion throughout underside of vehicle, including chassis legs, rear suspension components and front cross-member

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Front Brake pad(s) wearing thin (3.5.1g)

Fuel tank insecure (7.2.1)

Nearside Track rod end ball joint has excessive play (2.2.B.1f)

Offside Body has a projection caused by damage step (6.1.C.1)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Rear wheel bearing has slight play (2.6.2)

front discs corroded & brake judder present......

rear diff seal leaking...........

Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

both front brake discs corroded

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

both front brake discs corroded