2006 Mazda 3

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))

Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (c))

Offside Rear Service brake excessively binding (1.2.1 (f))

Offside Rear Stop lamp(s) not working with sidelights on (4.3.1 (a) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Brakes imbalanced across an axle (1.2.1 (b) (i))

inner sills corroded

sill covers fitted , unable to check condition

underside off vehicle corroded

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing cracked (5.2.3 (d) (ii))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge on limit now +cracked (5.2.3 (e))

Offside Rear Tyre slightly damaged/cracking or perishing cracked (5.2.3 (d) (ii))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive inner /outer sills /inner arches/ floor to sills (5.3.6 (a) (i))

Suspension arm corroded but not seriously weakened all arms (5.3.3 (b) (i))

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Parking brake inoperative on one side (1.4.1 (a))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing cracked (5.2.3 (d) (ii))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge on limit now +cracked (5.2.3 (e))

Offside Rear Tyre slightly damaged/cracking or perishing cracked (5.2.3 (d) (ii))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive inner /outer sills /inner arches/ floor to sills (5.3.6 (a) (i))

Suspension arm corroded but not seriously weakened all arms (5.3.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Rear Suspension arm corroded but not seriously weakened arms (2.4.G.1)

Seat belt anchorage prescribed area is corroded but not considered excessive sills/floor/inner sills (5.2.6)

brake disc worn, pitted or scored, but not seriously weakened all four (3.5.1i)

general underside corrosion

sill covers fitted

Nearside Front position lamp(s) not working (1.1.A.3b)

brake disc worn, pitted or scored, but not seriously weakened all four (3.5.1i)

general underside corrosion

sill covers fitted

Nearside Front Wheel nut(s) missing (4.2.A.1e)

Nearside Rear Wheel nut(s) missing (4.2.A.1e)

Nearside Rear brake caliper securing device missing (3.5.1j)

Nearside Rear coil spring broken (2.4.C.1a)

Offside Front Wheel nut(s) missing (4.2.A.1e)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Wheel nut(s) missing (4.2.A.1e)

Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Stop lamp not working (1.2.1b)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

NS REAR TYRE WORN AND NAIL

front pads worn

front tyres worn