MOT Status
ValidMileage
178,411 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Coil spring corroded BOTH rear (5.3.1 (b) (i))
Nearside Front Coil spring corroded (5.3.1 (b) (i))
Nearside Front Road wheel slightly distorted inner bead (5.2.2 (c) (i))
Nearside Front Tyre worn close to legal limit/worn on edge tyre size 2254517 (5.2.3 (e))
Offside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement outer linkages - both (5.3.4 (a) (i))
Rear Anti-roll bar pin or bush worn but not resulting in excessive movement D bushes to subframe (5.3.4 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bushes - both sides (5.3.4 (a) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive trailing arm mounting brackets - both sides (5.3.6 (a) (i))
Rear Upper Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))
engine stabiliser bracket - lower - worn bushes
exhaust heat shield over centre section insecure
nearside rear jacking block pad missing
offside and nearside front jacking block pads missing
Nearside Front Coil spring corroded (5.3.1 (b) (i))
Rear Anti-roll bar ball joint has slight play both sides (5.3.4 (a) (i))
Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Rear Anti-roll bar pin or bush worn but not resulting in excessive movement both sides d bushes (5.3.4 (a) (i))
Rear Coil spring corroded both sides (5.3.1 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Sub-frame mounting modified but not seriously weakened corroded both sides (5.3.3 (c) (i))
Rear Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Headlamp lens seriously defective (4.1.1 (b) (ii))
Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Headlamp lens seriously defective (4.1.1 (b) (ii))
Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Front Coil spring corroded (5.3.1 (b) (i))
Rear Anti-roll bar ball joint has slight play both sides (5.3.4 (a) (i))
Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Rear Anti-roll bar pin or bush worn but not resulting in excessive movement both sides d bushes (5.3.4 (a) (i))
Rear Coil spring corroded both sides (5.3.1 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Sub-frame mounting modified but not seriously weakened corroded both sides (5.3.3 (c) (i))
Rear Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))
Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Coil spring corroded both sides (5.3.1 (b) (i))
Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Nearside Front Position lamp light intensity obviously reduced (4.2.3 (a) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Coil spring corroded both sides (5.3.1 (b) (i))
Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Position lamp light intensity obviously reduced (4.2.3 (a) (i))
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear both rear tyres out of shape on inside edge
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear both rear tyres out of shape on inside edge
Front Brake disc worn, pitted or scored, but not seriously weakened both sides (1.1.14 (a) (ii))
Front Service brake fluctuating, but not excessively both sides (1.2.1 (e))
Nearside Front shock absorber casing corroded
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Rear Tyre slightly damaged/cracking or perishing both sides, also worn out of shape 225/45R17 (5.2.3 (d) (ii))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))
Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
nearside front and offside front shock absorber casing heavily corroded
Nearside Front Service brake fluctuating, but not excessively (1.2.1 (e))
Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))
Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))
Nearside Front Service brake fluctuating, but not excessively (1.2.1 (e))
Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))
Nearside Front Wheel bolt(s) missing (4.2.A.1e)
Nearside Rear Wheel bolt(s) missing (4.2.A.1e)
Offside Front Wheel bolt(s) missing (4.2.A.1e)
Offside Rear Wheel bolt(s) missing (4.2.A.1e)
Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Front coil spring broken (2.4.C.1a)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Rear Brake pad(s) wearing thin (3.5.1g)
Engine covers fitted obscuring some components in the engine bay
Under-trays fitted obscuring some underside components
rear inner brake pads look low
Engine covers fitted obscuring some components in the engine bay
Nearside Headlamp aim too high (1.8)
Offside Headlamp aim too high (1.8)
Under-trays fitted obscuring some underside components
rear inner brake pads look low
Under-trays fitted obscuring some underside components
Nearside Headlamp aim too low (1.8)
Offside Headlamp aim too low (1.8)
Under-trays fitted obscuring some underside components
Engine covers fitted obscuring some components in the engine bay
Under-trays fitted obscuring some underside components
rear of vehicle loaded unable to fully inspect seat belts
Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)
Offside Rear brake caliper leaking (3.6.A.1)
How Reliable is the Saab 9-3 Vector Sport Tid?
Based on 7,269 MOT tests across 928 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
DV07 KPO is a 2007 Saab 9-3 Vector Sport Tid in Silver with a 1,910cc diesel engine. This vehicle has been through 26 MOT tests with a personal pass rate of 61.5%.
Across all 2007 Saab 9-3 Vector Sport Tid models, the average MOT pass rate is 75.4% with a typical mileage of 103,205 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Saab 9-3 Vector Sport Tid fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 268 recorded failures. If you're considering buying DV07 KPO, it's worth having these areas checked by a mechanic before committing.
The Saab 9-3 Vector Sport Tid typically stays on UK roads for around 22 years. At 19 years old, this Saab 9-3 Vector Sport Tid is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of DV07 KPO?
You can check the full history of DV07 KPO by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was DV07 KPO registered?
DV07 KPO is a 2007 Saab 9-3 Vector Sport Tid, first registered on 31 March 2007.
Is DV07 KPO safe to buy?
The MOT history for DV07 KPO shows 26 tests with a 61.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does DV07 KPO have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on DV07 KPO. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.