2007 Subaru Impreza

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Emissions unable to be completed (8.2.1.2 (d))

Exhaust catalytic converter missing where one was fitted as standard (8.2.1.1 (a))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength flitch (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength flitch (5.3.6 (a) (i))

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Central Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Chassis / subframes / inner sill rails / inner wheel arches & various suspension components (6.2.2 (d) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Central Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Chassis / subframes / inner sill rails / inner wheel arches & various suspension components (6.2.2 (d) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Central Exhaust has a minor leak of exhaust gases Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Central Rear Upper Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Front Brake pad(s) wearing thin Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Lower Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security lower sill (6.2.2 (d) (i))

Offside Rear Brake pipe corroded, covered in grease or other material Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Lower Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security lower sill (6.2.2 (d) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Anti-roll bar linkage insecurely attached (5.3.3 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Central Rear Upper Stop lamp has less than 50% of the light sources illuminating (1.2.1b)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Front Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Parking brake: efficiency below requirements (3.7.B.7)

rear parking (secondary) brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.6b)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Tyre tread depth below requirements of 1.6mm inner edge off tyre tread split (4.1.E.1)

Offside rear brake binding (3.7.B.1)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Engine management lamp on

Nearside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)