2008 Chevrolet Matiz

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Rear Service brake fluctuating, but not excessively (1.2.1 (e))

rear axle corroded

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Exhaust mounting defective (6.1.2 (a))

Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting shock top mounting (6.2.2 (d) (i))

Rear Stop lamp(s) all not working (4.3.1 (a) (iii)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Exhaust mounting defective (6.1.2 (a))

Nearside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Rear Exhaust mounting defective (6.1.2 (a))

Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))

Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Rear Exhaust mounting defective (6.1.2 (a))

Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))

Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Play in steering rack inner joint(s) ()

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Axle slight corrosion

Offside Front Service brake binding but not excessively (1.2.1 (f))

Rear Axle slightly corroded

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Axle slightly corroded

Front Exhaust system insecure (6.1.2 (a))

Offside Rear Wheel bearing has excessive play (5.1.3 (a) (i))

Offside Front tyre worn on inner edge

Nearside rear brake binding (3.7.B.1)

Rear Brakes imbalanced across an axle 46% (3.7.B.5b)

Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt n/s and o/s (2.4.G.2)

Rear Exhaust system not adequately supported (7.1.1)

Offside rear brake binding (3.7.B.1)

rear brake application uneven (3.7.B.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)