MOT Status
ExpiredMileage
71,159 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn 'Both' (5.1.2 (b) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn 'Both' (5.1.2 (b) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e))
Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Nearside Front Inner Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
both reat wheel arches corroded not not within perscribed area
exhaust bracket loose
Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
both reat wheel arches corroded not not within perscribed area
exhaust bracket loose
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
both front floors have slight corrosion
both rear inner wheel arches have corrosion but not within perscribed area
exhaust bracket insecure
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Coil spring fractured or broken (5.3.1 (b) (i))
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
both front floors have slight corrosion
both rear inner wheel arches have corrosion but not within perscribed area
exhaust bracket insecure
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive inner wheel arch (2.4.A.3)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
front washers operate with rear switch
Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive inner wheel arch (2.4.A.3)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
front washers operate with rear switch
Nearside Front Tyre worn close to the legal limit inner edge (4.1.E.1)
Nearside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear slightly perished
Offside Front Tyre worn close to the legal limit inner edge (4.1.E.1)
Offside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Tyre worn close to the legal limit inner edge (4.1.E.1)
Nearside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear slightly perished
Offside Front Tyre worn close to the legal limit inner edge (4.1.E.1)
Offside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
n/s/r tyre slightly perished
Items removed from driver's view prior to test
Nearside Front Tyre has ply or cords exposed (4.1.D.1b)
Offside Front Tyre has ply or cords exposed (4.1.D.1b)
Offside Stop lamp not working (1.2.1b)
Items removed from driver's view prior to test
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
DV08 EPA is a 2008 Ford Ka in Grey with a 1,299cc petrol engine. This vehicle has been through 18 MOT tests with a personal pass rate of 61.1%.
Across all 2008 Ford Ka models, the average MOT pass rate is 71.0% with a typical mileage of 41,756 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying DV08 EPA, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 18 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of DV08 EPA?
You can check the full history of DV08 EPA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was DV08 EPA registered?
DV08 EPA is a 2008 Ford Ka, first registered on 28 March 2008.
Is DV08 EPA safe to buy?
The MOT history for DV08 EPA shows 18 tests with a 61.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does DV08 EPA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on DV08 EPA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.