2008 Toyota Aygo

Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Both front (5.3.4 (a) (i))

Brake hose has slight corrosion to ferrule Both rear (1.1.12 (f) (i))

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing Cracking in tread grooves (5.2.3 (d) (ii))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Hazard warning switch faulty (4.4.2 (a) (i))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Surface corrosion to front subframe.

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Surface corrosion to front subframe.

Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Hazard warning switch faulty (4.4.2 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Surface corrosion to front subframe.

Nearside Front Suspension arm pin or bush excessively worn Rear bush. (5.3.4 (a) (i))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Front Suspension arm pin or bush excessively worn Rear bush. (5.3.4 (a) (i))

Offside Parking brake inoperative on one side (1.4.1 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Surface corrosion to front subframe.

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear tyre perished

Offside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear tyre perished

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

oil leak

Exhaust system not adequately supported (7.1.1)

Offside rear brake binding (3.7.B.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

oil leak

Nearside Inner Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Inner Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

o/s/r tyreside wall badly perished

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear rear brake binding (3.7.B.1)

Nearside Inner Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Inner Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

o/s/r tyreside wall badly perished

All four tyres are starting to crack and perish

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front inner pads appear quite low.

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)