2008 Honda Civic

Emissions unable to be completed (8.2.1.2 (d))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Rear Exhaust system insecure (6.1.2 (a))

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened and rear all (1.1.14 (a) (ii))

Front Headlamp lens slightly defective (4.1.1 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive and both rear coilsprings corroded (5.3.6 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Coil spring corroded both sides (5.3.1 (b) (i))

Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))

Offside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Coil spring corroded both sides (5.3.1 (b) (i))

Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Fuel cap/sealing device ineffective (6.1.3 (b) (i))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Side repeater not working (4.4.1 (a) (ii))

Offside Front Anti-roll bar ball joint likely to become detached (5.3.4 (a) (ii)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Exhaust mounting defective (6.1.2 (a))

Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Rear Exhaust mounting defective (6.1.2 (a))

Brake pedal wearing smooth (1.1.2 (c))

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))

Brake pedal wearing smooth (1.1.2 (c))

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Stop lamp(s) all not working (4.3.1 (a) (iii))

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Stop lamp not working (1.2.1b)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

n/s/r tyre starting to crack on tread

Under-trays fitted obscuring some underside components

rear brake pads worn low