2009 Mercedes-benz Clk

Factory fitted covers

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement lower arm front bush split a lot and a lot of movement when braking (5.3.4 (a) (i))

Offside Rear Tyre slightly damaged/cracking or perishing Inner wall tear very deep close to going to cords ? (5.2.3 (d) (ii))

Factory fitted covers

Nearside Rear Position lamp showing white light to the rear Lamp damaged red tape been fitted (4.2.3 (a) (ii))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement lower arm front bush split a lot and a lot of movement when braking (5.3.4 (a) (i))

Offside Rear Tyre slightly damaged/cracking or perishing Inner wall tear very deep close to going to cords ? (5.2.3 (d) (ii))

Factory fitted covers

Offside Front Suspension arm ball joint dust cover severely deteriorated Tie rod arm (5.3.4 (b) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement Inner bush split a lot on tie rod arm (5.3.4 (a) (i))

Nearside Rear Position lamp showing white light to the rear Lens damaged (4.2.3 (a) (ii))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Exhaust mounting defective Middle metal mounting corroded off (6.1.2 (a))

Factory fitted covers

Nearside Front Tyre outer wall damaged from very low tyre pressure

Offside Front Suspension arm ball joint dust cover severely deteriorated Tie rod arm (5.3.4 (b) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement Inner bush split a lot on tie rod arm (5.3.4 (a) (i))

Windscreen wiper blade defective Both blades split (3.4 (b) (i))

Both front wiper blades split a bit at ends

Exhaust middle joint nuts corroded away from pins but still secure

Exhaust mounting defective Middle mounting corroded off (6.1.2 (a))

Factory fitted covers

Nearside Rear Lamp lens cracked

Offside Front Brake pipe by flexy rusty

Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Front Suspension arm ball joint dust cover severely deteriorated lower arm front one (5.3.4 (b) (i))

Offside handbrake sticking on after test but when vehicle moved released ?

Both front wiper blades split a bit at ends

Exhaust middle joint nuts corroded away from pins but still secure

Exhaust mounting defective Middle mounting corroded off (6.1.2 (a))

Factory fitted covers

Nearside Position lamp has a product on the lens or light source which shows white light to the rear Lamp damaged but red tape on lens (4.2.3 (b) (ii))

Nearside Rear Lamp lens cracked

Offside Front Brake pipe by flexy rusty

Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Front Suspension arm ball joint dust cover severely deteriorated lower arm front one (5.3.4 (b) (i))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside handbrake sticking on after test but when vehicle moved released ?

Exhaust metal mounting corroded of middle pipe

Factory fitted covers

Offside Front Suspension arm ball joint dust cover severely deteriorated Front lower arm (tie rod arm ) (5.3.4 (b) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement Lower arm ( tie rod ) inner bush split (5.3.4 (a) (i))

Nearside Front Suspension arm ball joint excessively worn Lower arm (back one ) (5.3.4 (a) (i))

Nearside Front Suspension arm ball joint excessively worn Lower arm (tie rod ) (5.3.4 (a) (i))

Exhaust metal mounting corroded of middle pipe

Factory fitted covers

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement Lower arm ( tie rod ) inner bush split (5.3.4 (a) (i))

Suspension arm ball joint dust cover severely deteriorated Both front lower arm (tie rods) (5.3.4 (b) (i))

Tracking adjuster very corroded

Brake pipe corroded, covered in grease or other material all 4 corroded at ends to flexi's (1.1.11 (c))

Exhaust mounting defective front mount corroded/thin, centre mount broken off, centre flange nuts corroded away (6.1.2 (a))

Nearside Front Upper Suspension arm ball joint dust cover severely deteriorated front arm (5.3.4 (b) (i))

Offside Front Upper Suspension arm ball joint dust cover severely deteriorated front arm (5.3.4 (b) (i))

factory covers fitted

rear inner faces sills/floor slightly corroded

Offside Front Lower Suspension arm ball joint excessively worn rear lower arm (5.3.4 (a) (i))

Brake pipe corroded, covered in grease or other material all 4 corroded at ends to flexi's (1.1.11 (c))

Exhaust mounting defective front mount corroded/thin, centre mount broken off, centre flange nuts corroded away (6.1.2 (a))

Nearside Front Upper Suspension arm ball joint dust cover severely deteriorated front arm (5.3.4 (b) (i))

Offside Front Upper Suspension arm ball joint dust cover severely deteriorated front arm (5.3.4 (b) (i))

factory covers fitted

rear inner faces sills/floor slightly corroded

Exhaust mounting defective broke off [center] (6.1.2 (a))

Front Brake pipe corroded, covered in grease or other material both side ends by brake hose (1.1.11 (c))

Nearside Front Suspension arm ball joint excessively worn [rear arm] (5.3.4 (a) (i))

Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Exhaust mounting defective broke off [center] (6.1.2 (a))

Front Brake pipe corroded, covered in grease or other material both side ends by brake hose (1.1.11 (c))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Exhaust mounting defective center mount broke off (6.1.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened inner face (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Brake pipe corroded, covered in grease or other material by brake hose (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material by brake hose (1.1.11 (c))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Exhaust mounting defective center mount broke off (6.1.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened inner face (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Brake pipe corroded, covered in grease or other material by brake hose (1.1.11 (c))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Exhaust mounting defective center mount broke off (6.1.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened inner face (1.1.14 (a) (ii))

Offside Front Brake pipe corroded, covered in grease or other material by brake hose (1.1.11 (c))

front tyres wearing on inner edges

Offside Obligatory mirror seriously obscured affecting the rear view (8.1.2a)

front tyres wearing on inner edges

Front wheel bearing has slight play Both sides front (2.5.A.3c)

Offside Front front brake fluctuating, but not excessively (3.7.B.3)

Rear Brake pad(s) wearing thin (3.5.1g)

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

plastic outer sill covers fitted

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front wheel bearing has slight play (2.5.A.3c)

Offside Front wheel bearing has slight play (2.5.A.3c)

Nearside Front Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Front Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front wheel bearing has slight play (2.5.A.3c)

Offside Front wheel bearing has slight play (2.5.A.3c)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

both rear tyres worn on edges