2012 Toyota Prius

Front Headlamp incorrect colour (4.1.4 (a))

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Headlamp aim too low (4.1.2 (a))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Body component damaged and likely to cause injury headlight (6.2.1 (a) (i))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Headlamp light intensity severely reduced (4.1.4 (a))

Offside Front Outer Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Front Headlamp has a product on the lens but not seriously reducing light output both sides (4.1.4 (b))

Front Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Tyre worn close to legal limit/worn on edge both sides (5.2.3 (e))

Front Anti-roll bar ball joint has slight play BOTH SIDES (5.3.4 (a) (i))

Front Brake disc worn, but not excessively BOTH SIDES (1.1.14 (a) (i))

Offside Rear Outer Integral body structure is modified but structural rigidity is not significantly reduced (6.1.1 (d) (i))

Rear Tyre slightly damaged/cracking or perishing BOTH SIDES (5.2.3 (d) (ii))

Front Windscreen wiper does not clear the windscreen effectively BOTH SIDES (3.4 (b) (ii))

Front Tyre tread depth below requirements of 1.6mm BOTH SIDES (5.2.3 (e)) DANGEROUS

Front Anti-roll bar ball joint has slight play BOTH SIDES (5.3.4 (a) (i))

Front Brake disc worn, but not excessively BOTH SIDES (1.1.14 (a) (i))

Offside Rear Outer Integral body structure is modified but structural rigidity is not significantly reduced (6.1.1 (d) (i))

Rear Tyre slightly damaged/cracking or perishing BOTH SIDES (5.2.3 (d) (ii))

Front Brake disc worn, but not excessively Both sides (1.1.14 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Tyre worn close to legal limit/worn on edge Both sides (5.2.3 (e))

Offside Rear Outer Integral body structure is deformed but structural rigidity is not significantly reduced Sill (6.1.1 (a) (i))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Rear fog lamp not working (4.5.1 (a) (ii))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Rear Road wheel fixing missing (5.2.1 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Headlamp aim too low (4.1.2 (a))

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)