MOT Status
ExpiredMileage
74,669 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Windscreen washer operation deteriorated
Nearside Integral body structure is corroded but structural rigidity is not significantly reduced Inner sill panel, entire length (6.1.1 (c) (i))
Nearside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced Inner sill panel (6.1.1 (c) (i))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Nearside Front Windscreen washer provides insufficient washer liquid (3.5 (a))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill panel, partially obscured by sill cover (5.3.6 (a) (i))
Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Nearside Integral body structure is corroded but structural rigidity is not significantly reduced Inner sill panel, entire length (6.1.1 (c) (i))
Nearside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced Inner sill panel (6.1.1 (c) (i))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Cooling fan operates continuously
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Chassis box section (2.4.A.3)
Nearside Suspension component mounting prescribed area is corroded but not considered excessive Inner sill, entire length (2.4.A.3)
Nearside front washer jet blocked
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Chassis box section (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner sill/wheel arch (2.4.A.3)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Rear Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is excessively corroded Inner sill/wheel arch (2.4.A.3)
Offside Rear Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Cooling fan operates continuously
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Chassis box section (2.4.A.3)
Nearside Suspension component mounting prescribed area is corroded but not considered excessive Inner sill, entire length (2.4.A.3)
Nearside front washer jet blocked
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Chassis box section (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner sill/wheel arch (2.4.A.3)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Engine management light is on
Nearside Rear Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Upper Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside front washer jet is blocked
Offside Rear Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Upper Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Nearside Rear Tie bar/rod ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Rear Tie bar/rod ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Coolant leak
Engine management light is on
Nearside Rear Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Nearside Rear Upper Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Offside Rear Upper Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Engine management light is on
Electronic stability system warning lamp indicates a fault (3.4.1c)
Nearside Front Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)
Engine management light is on
Offside Front Tyre has ply or cords exposed (4.1.D.1b)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Jaguar S-type?
Based on 942,176 MOT tests across 62,116 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
DV51 EYD is a 2001 Jaguar S-type in Blue with a 2,967cc petrol engine. This vehicle has been through 19 MOT tests with a personal pass rate of 73.7%.
Across all 2001 Jaguar S-type models, the average MOT pass rate is 71.6% with a typical mileage of 81,870 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Jaguar S-type fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 43,168 recorded failures. If you're considering buying DV51 EYD, it's worth having these areas checked by a mechanic before committing.
The Jaguar S-type typically stays on UK roads for around 27 years. At 25 years old, this Jaguar S-type is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of DV51 EYD?
You can check the full history of DV51 EYD by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was DV51 EYD registered?
DV51 EYD is a 2001 Jaguar S-type, first registered on 19 October 2001.
Is DV51 EYD safe to buy?
The MOT history for DV51 EYD shows 19 tests with a 73.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does DV51 EYD have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on DV51 EYD. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.