2003 Kia Sorento

Seat belt anchorage prescribed area strength or continuity significantly reduced both inner and outer sills holed corroded and weakened within testable points (7.1.1 (a) (i))

Central exhaust slight blow

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

general age related corrosion to body chassis and suspension components

sill covers fitted at time of test

Nearside Outer sill corroded holed but non structural or affecting any seat belt or seat mounting point or any suspension components as a 4 x 4 detachable body

exhaust system corroded

general age related corrosion to body chassis and suspension components

sill covers and plastic guards fitted at time of test

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength axle panhard rod mounting point (5.3.6 (a) (i))

Nearside Outer sill corroded holed but non structural or affecting any seat belt or seat mounting point or any suspension components as a 4 x 4 detachable body

exhaust system corroded

general age related corrosion to body chassis and suspension components

sill covers and plastic guards fitted at time of test

general age related corrosion to body ,chassis and suspension components

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Tyre tread depth below requirements of 1.6mm both rear (5.2.3 (e)) DANGEROUS

general age related corrosion to body ,chassis and suspension components

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

off side inner sill corroded

Nearside Rear Brake pipe leaking on an air braking system (1.1.11 (b) (i))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

off side inner sill corroded

Brake pipe excessively corroded both front at hose (1.1.11 (c))

Offside Front Anti-roll bar linkage insecure and impairing directional stability snapped (5.3.3 (a) (ii)) DANGEROUS

brake pipes greased

rear tyres cracking

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Headlamp not working on main beam (1.7.5a)

Offside Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

brake pipes greased

rear tyres cracking

Both rear shockers worn.No damping effect

Front shock absorbers worn.No damping effect

Offside front tyre worn on the inner edge

Oil leak SEVERE ENGINE OIL LEAK ()

Several brake pipes corroded

Both rear shockers worn.No damping effect

Front shock absorbers worn.No damping effect

Offside Headlamp aim too high and too far to the right. (1.8)

Offside front tyre worn on the inner edge

Oil leak SEVERE ENGINE OIL LEAK ()

Several brake pipes corroded

Nearside Rear position lamp(s) not working (1.1.A.3b)

Nearside Stop lamp not working (1.2.1b)

Nearside Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Oil leak

Brake pipe slightly corroded (3.6.B.2c)

Front Brake pad(s) wearing thin (3.5.1g)

Nail in nearside rear tyre

Offside Registration plate lamp not working (1.1.C.1d)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

parking brake cable pivot stiff

Brake pipe slightly corroded (3.6.B.2c)

Front Brake pad(s) wearing thin (3.5.1g)

Nail in nearside rear tyre

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

parking brake cable pivot stiff

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

rear numnber plate starting to blister

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)