2005 Peugeot Boxer

Vehicle Heavily Undersealed, the Sils are showing signs of corrosion

Headlamp lens slightly defective both front (4.1.1 (b) (i))

Nearside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Rear inner wheel arch corroded and holed front and rear

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

emits white smoke slight misfire

exhaust mount detached x1

underside covered with under seal

Brake load sensing valve linkage defective and function impaired (1.1.17 (a))

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Nearside Front Service brake excessively fluctuating (1.2.1 (e))

Nearside Front Subframe mounting prescribed area is inadequately repaired inner wing not fully welded (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under wheel arch arears (5.3.6 (a) (i))

Offside Front Subframe mounting prescribed area is inadequately repaired inner wing not fully welded (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under wheel arch areas (5.3.6 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Brake load sensing valve stiff (1.1.17 (c) (i))

Headlamp lens slightly defective both front (4.1.1 (b) (i))

Nearside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Rear inner wheel arch corroded and holed front and rear

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

both front disc brakes corroded

emits white smoke slight misfire

exhaust mount detached x1

underside covered with under seal

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Oil leak, but not excessive (8.4.1 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Nearside Front Direction indicator incorrect colour (4.4.3 (a))

Nearside Front Seat belt not functioning as intended centre passenger belt (7.1.2 (c))

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Headlamp aim too low (4.1.2 (a))

Nearside Rear Direction indicator incorrect colour (4.4.3 (a))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Direction indicator incorrect colour (4.4.3 (a))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Headlamp aim too low (4.1.2 (a))

Offside Rear Direction indicator incorrect colour (4.4.3 (a))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Rear Leaf spring to axle fixings loose to the extent that relative movement is visible (5.3.1 (a) (ii)) DANGEROUS

Coolant leak ()

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Brake hose has slight corrosion to ferrule ALL (1.1.12 (f) (i))

Brake pipe corroded, covered in grease or other material ALL (1.1.11 (c))

Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Front Upper Shock absorbers has a slightly worn bush (5.3.2 (c))

Nearside Front Vehicle structure is deformed but structural rigidity is not significantly reduced (6.1.1 (a) (i))

Offside Front Vehicle structure is deformed but structural rigidity is not significantly reduced (6.1.1 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced ALL (6.1.1 (c) (i))

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Front Shock absorbers has negligible damping effect (5.3.2 (d))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Brake hose has slight corrosion to ferrule ALL (1.1.12 (f) (i))

Brake pipe corroded, covered in grease or other material ALL (1.1.11 (c))

Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Front Upper Shock absorbers has a slightly worn bush (5.3.2 (c))

Nearside Front Vehicle structure is deformed but structural rigidity is not significantly reduced (6.1.1 (a) (i))

Offside Front Upper Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Front Vehicle structure is deformed but structural rigidity is not significantly reduced (6.1.1 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced ALL (6.1.1 (c) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive chassis and floor (5.3.6 (a) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive crossmember (5.3.6 (a) (i))

Nearside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis to floor (5.3.6 (a) (i))

exhaust croaded

front and rear brakes croaded vehicle been standing

ns and os top bearing noisey

vehicle has crossion at various body components underneath

Brake load sensing valve seized but ABS functioning (1.1.17 (c) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust system insecure mountings broken (6.1.2 (a))

Headlamp aim too low both headlights (4.1.2 (a))

Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength valance (5.3.6 (a) (i))

Front Coil spring corroded both sides (5.3.1 (b) (i))

Front Upper tot spring bearing stiff and noisey

Front cross member corroded

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive both front inner wings (5.3.6 (a) (i))

exhaust corroded

Exhaust mounting defective (6.1.2 (a))

Front Direction indicator slightly discoloured BOTH FRONT (4.4.3 (a))

Front Service brake binding but not excessively (1.2.1 (f))

Nearside Front Windscreen wiper blade defective ARM SLIGHTLY LOOSE (3.4 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Direction indicator slightly discoloured BOTH REAR (4.4.3 (a))

Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

engine oil leak

Nearside Headlamp not working on dipped beam (1.7.5a)

engine oil leak

Oil leak

Rear Brake load sensing valve seized (3.6.E.3)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Oil leak

off side wiper split

rear near side tyre nearing limits

Brakes imbalanced across an axle (3.7.B.5b)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

off side wiper split

rear near side tyre nearing limits