MOT Status
ValidMileage
81,620 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Coil spring corroded all (5.3.1 (b) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Macpherson strut corroded but not seriously weakened both cups (5.3.3 (b) (i))
Front Macpherson strut damaged but not seriously weakened both (5.3.3 (b) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))
Vehicle structure is corroded but structural rigidity is not significantly reduced all over (6.1.1 (c) (i))
rear alxe rusted
rear shock absobors rusted
rust under car
sills rusted
Emissions unable to be completed (8.2.1.2 (d))
Exhaust has a major leak of exhaust gases (6.1.2 (a))
Front Headlamp aim projected beam image is obviously incorrect both (4.1.2 (c))
Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Front Sub-frame corroded and seriously weakened (5.3.3 (b) (i))
Front Macpherson strut corroded but not seriously weakened both (5.3.3 (b) (i))
Front Service brake fluctuating, but not excessively (1.2.1 (e))
Front Sub-frame corroded but not seriously weakened all over (5.3.3 (b) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Vehicle structure is corroded but structural rigidity is not significantly reduced all over (6.1.1 (c) (i))
rear axle rusted
rust under car
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Seat belt anchorage prescribed area is corroded but not considered excessive sills (7.1.1 (a) (i))
Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Front Inner Brake disc significantly and obviously worn (1.1.14 (a) (i))
Headlamp aim projected beam image is obviously incorrect both (4.1.2 (c))
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outter sill (7.1.1 (a) (i))
Nearside Rear Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i))
Nearside Rear Parking brake mechanism/associated mounting prescribed area is excessively corroded back plate (1.1.21 (e) (i))
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outter sill (7.1.1 (a) (i))
Nearside Rear Service brake excessively binding (1.2.1 (f))
Offside Rear Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected axle mount (5.3.6 (a) (ii)) DANGEROUS
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive axle mounts (5.3.6 (a) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Seat belt anchorage prescribed area is corroded but not considered excessive sills both inner and outter (7.1.1 (a) (i))
rear axle rusted
rust all over under car
Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Service brake excessively binding (1.2.1 (f))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Axle mount (5.3.6 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Service brake excessively binding (1.2.1 (f))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength axle mount (5.3.6 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Rear Parking brake inoperative on one side (1.4.1 (a))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Brake pipe excessively corroded front to rear (1.1.11 (c))
Nearside Rear Service brake excessively binding (1.2.1 (f))
Offside Rear Service brake excessively binding (1.2.1 (f))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Offside Rear Service brake binding but not excessively (1.2.1 (f))
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Headlamp aim projected beam image is obviously incorrect deteoriated (4.1.2 (c))
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Front Service brake excessively binding (1.2.1 (f))
Offside Headlamp aim projected beam image is obviously incorrect deteoriated (4.1.2 (c))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Offside Rear Service brake binding but not excessively (1.2.1 (f))
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive subframe (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive subframe (5.3.6 (a) (i))
Nearside Front Headlamp deteriorated but light output not reduced (1.7.5a)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front Headlamp deteriorated but light output not reduced (1.7.5a)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
front discs worn on inner face
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Peugeot 107?
Based on 2,229,410 MOT tests across 139,779 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
DV55 UPS is a 2005 Peugeot 107 in Yellow with a 998cc petrol engine. This vehicle has been through 25 MOT tests with a personal pass rate of 76%.
Across all 2005 Peugeot 107 models, the average MOT pass rate is 71.9% with a typical mileage of 58,548 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Peugeot 107 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 42,280 recorded failures. If you're considering buying DV55 UPS, it's worth having these areas checked by a mechanic before committing.
The Peugeot 107 typically stays on UK roads for around 21 years. At 21 years old, this Peugeot 107 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of DV55 UPS?
You can check the full history of DV55 UPS by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was DV55 UPS registered?
DV55 UPS is a 2005 Peugeot 107, first registered on 30 November 2005.
Is DV55 UPS safe to buy?
The MOT history for DV55 UPS shows 25 tests with a 76% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does DV55 UPS have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on DV55 UPS. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.