2003 Honda XL650

Front Brake binding but not excessively (1.2.1 (f))

Steering headbearing slightly stiff or notchy slight notch in the centre forward position (2.2.2 (f) (i))

Front Brake binding but not excessively (1.2.1 (f))

Rear Position lamp not working Rear bulb was blown on the tail light filament (4.2.1 (a))

Steering headbearing slightly stiff or notchy slight notch in the centre forward position (2.2.2 (f) (i))

Front Brake binding but not excessively (1.2.1 (f))

Offside Rear Inner Exhaust has a minor leak of exhaust gases slight blow from inside of silencer (6.1.2 (a))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Dipswitch does not operate immediately when selected on dipped beam switch was sticking (4.1.3 (b))

Front Stop lamp not working (4.3.1 (a) (ii))

Offside Rear Inner Exhaust has a minor leak of exhaust gases slight blow from inside of silencer (6.1.2 (a))

Rear Position lamp not working (4.2.1 (a))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Tyre worn close to the legal limit tyre is on the legal limit (5.2.3 (e))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Rear Tyre worn close to the legal limit (5.2.3 (e))

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Roller brake test indicates a binding brake (3.3.A1a)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Drive chain slightly loose (6.2.1d)

Drive chain sprocket slightly worn (6.2.1e)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Steering movement slightly 'notchy' (2.2.1a)

Drive chain slightly loose (6.2.1d)

Rear wheel bearings have slight free play (2.4.A.2c)

Drive chain excessively tight (6.2.1d)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear Wheel corroded but not significantly reducing the original strength (4.2.1a)

Drive chain slightly loose (6.2.1d)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))