2005 Fiat Ducato

Nearside Front Inner Tyre worn close to legal limit/worn on edge Shoulder (5.2.3 (e))

Rear Exhaust Back Box Corroded

Rear Exhaust mounting defective (6.1.2 (a))

Registration plate deteriorated but not likely to be misread Front and Rear Both (0.1 (b))

Brake load sensing valve linkage defective but function not impaired slight adjustment needed (1.1.17 (a))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL X2 (5.3.6 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Offside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill ( marked with chalk ) (6.2.2 (d) (i))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Offside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Rear kerb damage to outer tyre sidewall

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

outer-sill covers fitted

tow-bar socket cover missing

Nearside Rear Direction indicator incorrect colour (4.4.3 (a))

Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Direction indicator incorrect colour (4.4.3 (a))

Exhaust mounting defective rear one broken-and others deteriorated (6.1.2 (a))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear kerb damage to outer tyre sidewall

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

outer-sill covers fitted

tow-bar socket cover missing

Front coil spring corroded n/s and o/s (2.4.C.1b)

Offside centre plastic bumper mould loose

Rear n/s and o/s tyre cracking

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement n/s and o/s (2.4.G.2)

Front Suspension arm rubber bush deteriorated but not resulting in excessive movement n/s and o/s (2.4.G.2)

Front coil spring corroded n/s and o/s (2.4.C.1b)

Front n/s and o/s tyre wearing on inner edge

Rear n/s and o/s tyre cracking

exhaust rubbers wearing

Exhaust has a minor leak of exhaust gases middle section joint (7.1.2)

Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement n/s and o/s (2.4.G.2)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front n/s and o/s brake slightly tight

Rear Direction indicator slightly discoloured n/s and o/s (1.4.A.2f)

all exhaust rubbers wearing

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

Exhaust system not adequately supported (7.1.1)

Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Registration plate lamp not working (1.1.C.1d)

Rear Brakes imbalanced across an axle (3.7.B.5b)

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

n/s/r brake slightly binding