2006 Ford Focus

Nearside Front Outer Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Horn not working (7.7 (a))

Nearside Parking brake inoperative on one side (1.4.1 (a))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheelarch (5.3.6 (a) (i))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Central Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Central Front Oil leak, but not excessive (8.4.1 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Central Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Central Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Central Front Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear rough when roteted

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Parking brake inoperative on one side (1.4.1 (a))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner and outer sills. (6.1.1 (c) (i))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner and outer sills. (6.1.1 (c) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Direction indicator slightly discoloured (4.4.3 (a))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Fluid leak, but not excessive coolant bottle split (8.4.1 (a) (i))

Offside Rear Direction indicator slightly discoloured (4.4.3 (a))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement Rear Bush (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement Rear Bush (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement at rear of arm (2.4.G.2)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement at rear of arm (2.4.G.2)

various under body corrosion.

Nearside Rear Direction indicator incorrect colour (1.4.A.2f)

Tyre tread depth below requirements of 1.6mm (4.1.E.1)

front brake application uneven (3.7.B.2)