2007 Kawasaki Er 650 A7F

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Registration plate lamp does not illuminate simultaneously with the position lamp(s) blown bulb (4.7.2 (a))

Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e))

Headlamp aim projected beam image obviously incorrect (4.1.2 (c))

Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Offside Front Brake disc contaminated (1.1.14 (b))

Offside Front Brake pad(s) contaminated (1.1.13 (b))

Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Offside Rear Direction indicator lens defective such that the emitted light is adversely affected missing (4.4.1 (b) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Brake binding but not excessively Front (1.2.1 (f))

Brake pedal is bent but brake can still be readily applied Rear (1.1.2 (d))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Brake binding but not excessively (1.2.1 (f))

Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Registration plate does not conform to the specified requirements (0.1 (d))

Brake binding but not excessively (1.2.1 (f))

Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Front Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d)

Horn not working (1.7.3a)

Front wheel bearings are slightly rough (2.3.5b)

Front wheel bearings are slightly rough (2.3.5b)

Rear left indicator mount slightly damaged.

Front wheel bearings are slightly rough (2.3.5b)

Headlamp aim too high (1.6)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front wheel bearings are slightly rough (2.3.5b)