2013 Ford Transit

Brake pedal wearing smooth (1.1.2 (c))

Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Front Play in steering rack inner joint(s)

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Front Oil leak, but not excessive (8.4.1 (a) (i))

General surface corrosion to underbody and some suspension components

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Anti-roll bar linkage insecurely attached ball has come out of socket (5.3.3 (a) (i))

Nearside Front Direction indicator not working (4.4.1 (a) (ii))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Rear Position lamp has a product on the lens or light source which shows white light to the rear hole in lens (4.2.3 (b) (ii))

Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps both no plate lights (4.7.1 (b) (ii))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Front unable to check seatbelts pass side

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Brake disc worn, pitted or scored, but not seriously weakened all 4 (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Non obligatory mirror damaged

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Central Rear Stop lamp(s) with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Fuel cap/sealing device missing (6.1.3 (b) (i))

Central Rear Stop lamp(s) with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Parking brake: efficiency below requirements (3.7.B.7)

Central Stop lamp not working (1.2.1b)

Nearside passenger door cannot be opened from outside the vehicle (6.2.B.1c)

Parking brake lever has little reserve travel (3.1.6b)

Rear Inner Brake pad(s) wearing thin both sides (3.5.1g)

Registration plate lamp not working both (1.1.C.1d)

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Electronic stability system warning lamp indicates a fault (3.4.1c)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)