2001 Toyota Yaris

Central Front Exhaust mounting defective (6.1.2 (a))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Anti-roll bar linkage damaged but not seriously weakened (5.3.3 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Exhaust mounting defective bracket (6.1.2 (a))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive and os inner sills (5.3.6 (a) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

rear axel rusty

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Exhaust mounting defective bracket (6.1.2 (a))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive and os inner sills (5.3.6 (a) (i))

Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt insecure (2.1.3 (g) (ii))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

rear axel rusty

Front Exhaust mounting defective (6.1.2 (a))

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge slightly cracked from inner wall (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Inner Subframe mounting prescribed area is corroded but not considered excessive sills both sides (5.3.6 (a) (i))

Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear tyre deteriorating

Offside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear inner tyre wall deteriorating

Nearside Front Brake pipe modified but not seriously weakened (3.6.A.3)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Brake load sensing valve linkage stiff (3.6.E.3)

inner sills corroded

Brake load sensing valve inoperative (3.6.E.3)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Headlamp aim too low (1.8)

Offside Rear fog lamp not working (1.3.2b)

Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)

inner sills corroded

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Headlamp aim too high (1.8)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

front anti roll bar link bushs starting to perish

Offside Rear rear brake recording little or no effort (3.7.B.5a)

Parking brake: efficiency below requirements (3.7.B.7)