2003 Aprilia RS 50

p taylor only inspected failed items

Rear Brake pedal has inadequate reserve travel (3.1.3b)

Rear Tyre tread not clearly visible (4.1.3(i))

Front shock absorber has light misting of stanchion (2.3.3)

mirrors missing

Headlamp aim not tested (1.6)

Indicator switch insecure (1.5.4)

All position lamps do not illuminate immediately when switched on (1.1.3a)

Direction indicators flashing more than 120 times per minute (1.5.1c)

Rear mono-shock pivot excessively worn (2.4.B.4)

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Wheel alignment incorrect which adversely affects the handling (2.5.1)

General condition

Mirrors missing

Front shock absorber has light misting of stanchion (2.3.3)

Headlamp aim too high (1.6)

Steering headbearing has excessive free play (2.2.2)

Drive chain slightly loose (6.2.1d)

Front Floor brake test indicates a slightly grabbing brake (3.3.C2d)

Headlamp aim too high (1.6)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Drive chain slightly loose (6.2.1d)

Front Floor brake test indicates a slightly grabbing brake (3.3.C2d)

Direction indicators flashing more than 120 times per minute (1.5.1c)

Front Steering headbearing has excessive free play (2.2.2)

Riders seat insecure (6.2.1a)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i)) DANGEROUS

Offside Front Handlebar mounting clamp bolt loose (2.1.1a) DANGEROUS

Roller brake test Neither brake control achieves an efficiency of 25% (3.3.A2b) DANGEROUS

Roller brake test No brake control achieves an efficiency of 30%. (3.3.A2a) DANGEROUS

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

clutch lever incorrect for model limited return travel

gear linkage broken

left hand mirror insecure

clutch dragging

oil leaking from 2 stroke oil tank

Front Brake pads getting down.

Rear tyre close to minimum tread requirement.

Slight movement in lower shock bush

Exhaust slightly deteriorated (7.1.1a)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Front wheel spindle securing nut(s) loose (2.3.3a)

Locking devices not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Rear Drive chain sprocket worn to excess (6.2.1e)

Exhaust slightly deteriorated (7.1.1a)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Nearside Front Front position lamp does not illuminate immediately when switched on (1.1.3a)

Nearside Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)