2004 Aprilia SR50

Floor brake test Neither brake control achieves an efficiency of 25% (3.3.C1b)

Floor brake test No brake control achieves an efficiency of 30%. (3.3.C1a)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Steering headbearing has excessive free play (2.2.2)

Exhaust is leaking and excessively noisey (7.1.1b)

Exhaust mounting does not fully support the exhaust system (7.1.1.c)

Exhaust mounting missing (7.1.1c)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Fuel cap sealing washer missing (7.2.2c)

Headlamp aim not tested (1.6)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking (6.1.1c)

Nearside Front Direction indicator flashing more than 120 times per minute (1.5.1c)

Nearside Rear Direction indicator flashing more than 120 times per minute (1.5.1c)

Offside Front Direction indicator not working (1.5.1c)

Offside Rear Direction indicator not working (1.5.1c)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Front Brake disc(s) slightly worn (3.2.A1l)

Rear Tyre worn close to the legal limit (4.1.3(i))

Front Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Rear Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Tyre worn close to the legal limit (4.1.3(ii))

Wheel alignment slightly misaligned. (2.5.1)

front fairing panel loose, rear huger loose. air box loose.

Headlamp aim too high (1.6)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Offside Steering lock stop ineffective (2.1.3)

Rear Front mudguard can easily contact the tyre (2.3.7)

Riders seat insecure (6.2.1a)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Tyre worn close to the legal limit (4.1.3(ii))

Wheel alignment slightly misaligned. (2.5.1)

front fairing panel loose, rear huger loose. air box loose.

Rear Rear wheel bearings have slight free play (2.4.A.2c)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Rear wheel bearings have slight free play (2.4.A.2c)