2013 Peugeot 208

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Front Headlamp aim projected beam image is obviously incorrect dip beam image (4.1.2 (c))

Nearside Front Headlamp aim too high (4.1.2 (a))

Nearside Front Service brake lagging in operation giving 30% operational imbalance (1.2.1 (d))

Offside Front Headlamp aim projected beam image is obviously incorrect dip beam image (4.1.2 (c))

Offside Front Headlamp aim too low (4.1.2 (a))

Offside Front Tyre has a bulge, caused by separation or partial failure of its structure outer side wall (5.2.3 (d) (ii)) DANGEROUS

Offside Front Tyre has a tear, caused by separation or partial failure of its structure outer side wall, cords/structure exposed (5.2.3 (d) (ii)) DANGEROUS

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust emits excessive dense blue smoke during acceleration (8.2.1.2 (g))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Rear Parking brake inoperative on one side (1.4.1 (a))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Oil leak, but not excessive (8.4.1 (a) (i))

Offside Headlamp aim too high (4.1.2 (a))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Exhaust mounting defective back box mount broken (6.1.2 (a))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Road wheel fixing missing (5.2.1 (a) (i))

Nearside Rear Road wheel fixing missing (5.2.1 (a) (i))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Road wheel fixing missing (5.2.1 (a) (i))

Offside Rear Road wheel fixing missing (5.2.1 (a) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Exhaust mounting defective back box mount broken (6.1.2 (a))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Brake pad(s) wearing thin front both (1.1.13 (a) (ii))

Brake pad(s) wearing thin front both (1.1.13 (a) (ii))

Headlamp aim too low front both (4.1.2 (a))

Front exhaust mounting bracket split and corroded

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Oil leak, but not excessive diff seal (8.4.1 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Rear exhaust bracket is broken

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)