2003 Toyota Celica

Exhaust has a minor leak of exhaust gases centre silencer blowing (6.1.2 (a))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front chassis rails offside and near side covered by underseal

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Outer Tyre worn close to legal limit/worn on edge 2.0mm 205/45/17 (5.2.3 (e))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Outer Tyre worn close to legal limit/worn on edge 3.0mm 205/45/17 (5.2.3 (e))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

front suspension components have general corrosion

rear floor pan covered in underseal

rear suspension covered by underseal offside and nearside

Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed and corroded (6.1.1 (c) (i))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Exhaust has a minor leak of exhaust gases centre silencer blowing (6.1.2 (a))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front chassis rails offside and near side covered by underseal

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Outer Tyre worn close to legal limit/worn on edge 2.0mm 205/45/17 (5.2.3 (e))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Outer Tyre worn close to legal limit/worn on edge 3.0mm 205/45/17 (5.2.3 (e))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

front suspension components have general corrosion

rear floor pan covered in underseal

rear suspension covered by underseal offside and nearside

Both front chassis rails corroded

Both rear inner sills under sealed

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear suspension components undersealed

Sill covers fitted

Offside Front Sub-frame corroded and seriously weakened (5.3.3 (b) (i))

Both front chassis rails corroded

Both rear inner sills under sealed

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear suspension components undersealed

Sill covers fitted

Offside front tyre cracked along tread

Rear inner wheel arches corroded

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

brake pedal spongy

inner sill corroded

wiper blade deteriorated

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Brake pipe slightly corroded (3.6.B.2c)

rear pads worn

Offside Rear coil spring incomplete (2.4.C.1a)

Nearside Rear coil spring corroded (2.4.C.1b)

rear pads worn

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Front Brake pad(s) wearing thin (3.5.1g)

Brake pedal creeps down when held under pressure (3.3.B.1a)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)