MOT Status
ExpiredMileage
114,244 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
welding on outer sill offside
Indicator switch faulty (1.4.A.1)
Suspension component mounting prescribed area is excessively corroded outer sills offside + nearside have been welded (2.4.A.3)
welding on outer sill offside
Clutch excessivley worn.
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Registration plate lamp not working (1.1.C.1d)
Windscreen washer provides insufficient washer liquid (8.2.3)
Clutch excessivley worn.
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Vehicle structure has slight corrosion (6.1.A.1)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Vehicle structure has slight corrosion (6.1.A.1)
Oil leak
Emissions not tested (7.0)
Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Headlamp not working on dipped beam (1.7.5a)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)
Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)
Offside Front Headlamp aim too low (1.8)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)
Offside Rear Brake hose excessively deteriorated (3.6.B.4d)
Offside Rear Registration plate lamp not working (1.1.C.1d)
Offside Rear Stop lamp not working (1.2.1b)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Brake hose excessively deteriorated (3.6.B.4d)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Rear Body has a projection caused by corrosion (6.1.C.1)
Nearside Stop lamp not working (1.2.1b)
Offside Front Brake hose excessively deteriorated (3.6.B.4d)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Registration plate lamp not working (1.1.C.1d)
Engine covers fitted obscuring some components in the engine bay
Nearside Body has slight corrosion (6.1.B.2)
Nearside Rear Brake hose slightly deteriorated (3.6.B.4d)
Offside Body has slight corrosion (6.1.B.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Brake hose slightly deteriorated (3.6.B.4d)
Under-trays fitted obscuring some underside components
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear coil spring incomplete (2.4.C.1a)
Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Headlamp aim too low (1.8)
Offside Front Tyre has ply or cords exposed (4.1.D.1b)
Offside Headlamp aim too low (1.8)
Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a) DANGEROUS
Offside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c) DANGEROUS
front discs+pads worn
front tyres wearing on inside edges
some corrosion on n/s+o/s inner sills
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Rear Stop lamp not working (1.2.1b)
Offside Rear coil spring incomplete (2.4.C.1a)
Front Windscreen washer provides insufficient washer liquid (8.2.3)
front discs+pads worn
front tyres wearing on inside edges
some corrosion on n/s+o/s inner sills
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)
Nearside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Offside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Offside Headlamp not working on dipped beam (1.7.5a)
Nearside Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
DY03 LLP is a 2003 Ford Ka in Black with a 1,299cc petrol engine. This vehicle has been through 19 MOT tests with a personal pass rate of 57.9%.
Across all 2003 Ford Ka models, the average MOT pass rate is 66.4% with a typical mileage of 47,451 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying DY03 LLP, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 23 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of DY03 LLP?
You can check the full history of DY03 LLP by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was DY03 LLP registered?
DY03 LLP is a 2003 Ford Ka, first registered on 26 March 2003.
Is DY03 LLP safe to buy?
The MOT history for DY03 LLP shows 19 tests with a 57.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does DY03 LLP have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on DY03 LLP. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.