MOT Status
ExpiredMileage
125,735 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Position lamp not working (4.2.1 (a))
Nearside Headlamp aim not tested (4.1.2 (b))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm front bush (5.3.4 (a) (i))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm front bush (5.3.4 (a) (i))
Oil leak, but not excessive sump corroded (8.4.1 (a) (i))
offside sill corroding
slight play in offside driveshaft centre bearing
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
sump damp/corroded
Nearside Front tyre wearing inner edge
Offside Front tyre inner edge bald
Rear Exhaust system not adequately supported (7.1.1)
Registration plate lamp insecure (1.1.C.1c)
Nearside Rear Shock absorber detached (2.7.2b) DANGEROUS
Nearside Front tyre wearing inner edge
Offside Front tyre inner edge bald
Nearside Front Headlamp not working on dipped beam (1.7.5a)
Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)
Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Rear Registration plate lamp not working (1.1.C.1d)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front coil spring corroded (2.4.C.1b)
Under-trays fitted obscuring some underside components
offside front tyre wearing inner edge
offside rear tyre wearing inner edge
Offside Rear coil spring broken (2.4.C.1a)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Under-trays fitted obscuring some underside components
both front tyres wearing on edges
n/s/r tyre worn on inner edge
Nearside Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Front brake disc slightly pitted (3.5.1h)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear brake disc slightly pitted (3.5.1h)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front brake disc slightly pitted (3.5.1h)
Offside Rear brake disc slightly pitted (3.5.1h)
wiper blades are smearing
Cuts in nearside front tyre outer side wall, no cords showing.
How Reliable is the Mazda 3?
Based on 2,040,939 MOT tests across 164,053 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
DY06 MKU is a 2006 Mazda 3 in Black with a 1,598cc petrol engine. This vehicle has been through 15 MOT tests with a personal pass rate of 73.3%.
Across all 2006 Mazda 3 models, the average MOT pass rate is 74.6% with a typical mileage of 70,278 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 40,716 recorded failures. If you're considering buying DY06 MKU, it's worth having these areas checked by a mechanic before committing.
The Mazda 3 typically stays on UK roads for around 22 years. At 20 years old, this Mazda 3 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of DY06 MKU?
You can check the full history of DY06 MKU by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was DY06 MKU registered?
DY06 MKU is a 2006 Mazda 3, first registered on 28 April 2006.
Is DY06 MKU safe to buy?
The MOT history for DY06 MKU shows 15 tests with a 73.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does DY06 MKU have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on DY06 MKU. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.