2006 Mazda 3

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Headlamp aim too low (4.1.2 (a))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Nearside Rear Suspension arm pin or bush excessively worn trailing arm bush (5.3.4 (a) (i))

Nearside Rear Wheel bearing has excessive play not checkted due to brake binding (5.1.3 (a) (i))

Offside Headlamp aim too low (4.1.2 (a))

Offside Headlamp light intensity severely reduced (4.1.4 (a))

Offside Rear Body component corroded and likely to cause injury outer wheel artch (6.2.1 (a) (i))

Offside Rear Suspension arm pin or bush excessively worn trailing arm bush (5.3.4 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Exhaust system insecure (6.1.2 (a))

Front heat shield ins

Fuel Pipe/s corroded filler pipes ()

Items removed from driver's view prior to test ()

Nearside Front Outer Suspension component mounting prescribed area damaged but not considered excessive sill (5.3.6 (a) (i))

Nearside Front Position lamp light intensity obviously reduced (4.2.3 (a) (i))

Nearside Front bumpaer damsge repaired

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge 2.0mm (5.2.3 (e))

Offside Front Position lamp light intensity obviously reduced (4.2.3 (a) (i))

Offside Front wing corroded

Central Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Central Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Stop lamp not working (1.2.1b)

Rear Exhaust system not adequately supported (7.1.1)

Rear registration plate dirty (6.3.1d)

Offside Front Shock absorber has a serious fluid leak (2.7.3)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Rear Shock absorber has a serious fluid leak (2.7.3)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

rear brake application uneven (3.7.B.2)

Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Child seat fitted not allowing full inspection of adult belt

Both rear Tyres Deteriorated. Cracking between treads

Child seat fitted not allowing full inspection of adult belt

Both rear Tyres Deteriorated. Cracking between treads

Child seat fitted not allowing full inspection of adult belt

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

both front tyres wearing on inner edges

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

both front tyres wearing on inner edges

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)